Hose length
Hose length
(OP)
Hi all,
I use a pine(hose) in my design, I use the comand under INSERT/ ADVANCED/ PIPE to connect points. I see a "total length of hose = value" when I edit the program. How can I extract that total hose length "value" to be shown on my BOM.
Thanks,
I use a pine(hose) in my design, I use the comand under INSERT/ ADVANCED/ PIPE to connect points. I see a "total length of hose = value" when I edit the program. How can I extract that total hose length "value" to be shown on my BOM.
Thanks,





RE: Hose length
David
RE: Hose length
something like;
plen=total_length_of_pipe:fid_fea#
but that don't float