Generic/Instance regen behavior...
Generic/Instance regen behavior...
(OP)
...that is to say, they aren't regenerating at all. i have one part, for example, that has several instances. none of the instances are regenerating with their tabled values. they can verify just fine, but when opened, i get a part geometrically the same size as the generic, but showing the correct dim values in purple, like so:

i don't remember this happening in 2001 or earlier, (not that it didn't), but i'm stumped. i hope it's something simple.
WF3 M030, no PDM, XP

i don't remember this happening in 2001 or earlier, (not that it didn't), but i'm stumped. i hope it's something simple.
WF3 M030, no PDM, XP
Ed Lee
Sr. Designer
H2Gen
Alexandria, VA





RE: Generic/Instance regen behavior...
SPR Details
Call # 1250475
Status Open
Severity High
Created Date 17-May-2006
Last Updated 20-Dec-2006
Closed Date
Respond By Date 12-Oct-2006
Description
When feature dimensions is modified by selecting the feature>#Right click, Edit, the value is not regenerating for dimensions which are in purple color.
Affected Products
Product Pro/ENGINEER
Module FEATURE
Reported Release Wildfire 3.0
Reported Datecode F000
Affected Platform All Windows
Resolved Release
Wildfire 3.0
Wildfire 4.0
Commit Datecode
M070
Not Available
Resolved Datecode
M070
A230
Related Documents
Type
Call #
Status
Description
None Available
Ed Lee
Sr. Designer
H2Gen
Alexandria, VA