×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Preloading

Preloading

Preloading

(OP)
We know that when loading-unloading a sample of overconsolidated clay in the oedometer, the path on the e-logp' is about the same when loading and when unloading.
Experience on preloading overconsolidated clay with a fill shows substential improvement in the sense that rebound when tremoving the fill is about 1/3 of the settlement obtained under the fill load.
I would like to find info on this matter and satisfactory explanation. If anyone could help me would be very grateful.

RE: Preloading

phillipe,

You appear to say that the field deformation (in this case swelling) characteristics of overconsolidated clays are different than the oedometer results under the same pressures.

Recall that in the lab, there is an unlimited supply of water available to restore into the pore spaces of the clay. This may not be the case under field conditions.

Secondly, in the field, the time for the swelling to occur will be longer as the size of the affected loaded area is much much larger than an oedometer sample. Also, the flow path of the pore water may be lateral rather than vertical for much of the in-situ soil. Thus, the amount of swelling may be the same, but the time rate for full rebound in the field (at the permeabilities involved) may be orders of magnitude longer than that required in the lab.

Just my thoughts,

Jeff

RE: Preloading

If you exceed the preconsolidation pressure and cause settlement then you essentially change the soil to a stiffer one.  This would make the unload flatter than the loading curve. If you load below the preconsolidation pressure then I would agree that the load-unload slope should be similar.  

Remember also, that within the soil profile, there may be some variability of stress history such that some zones may exceed the preconsolidation stress and other zones may not.  Beneath a preload, the distribution of stress and settlement is a 3-D problem.  In an oedometer it is assumed to be 1-D.

ps: why would you be preloading an overconsolidated clay?

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources