×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Vacuum

Vacuum

(OP)
Is there a way to estimate cfm through an opening
vs (peak?) hp rating on a vacuum ?
For instance, a 4.5 peak hp shop vacuum connected via a standard 2" hose to a chamber that has a 6" opening at one end.
How is this measured?

The hp rating on a vacuum is theoretical at best (and most likely exaggerated); is there any other way to rate it?

Are there any charts or Excel templates that might cover this subject?
Thanks,
Gatz

RE: Vacuum

Short answer, no.

RE: Vacuum

I think you can get a decent ESTIMATE of CFM using pretty much standard flow equations, but not with the shortcut methods used for pressurized air flows.  You've got a dP, a known area, but you'll have to make assumptions for hose friction.  I'm not sure why you say HP ratings are "theoretical";  vacuums are a fan and have P-V curves like any other. If you are truly dealing with a ShopVac and not a commercial blower, I can imagine the curve isn't "pretty".

I have done some piping work on process vacuum systems and a rigorous analysis of pressure drops and flows in a system gets pretty complicated.  

RE: Vacuum

You could MEASURE the flow reasonably easily.

Some water, a length of clear hose, a shoe box, tape and some card board would be all you need.

RE: Vacuum

Thinking further, I don't think you would need the card board.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources