PE: Structural I or Civil?
PE: Structural I or Civil?
(OP)
I took the structural I PE exam in October and did not pass. Although I feel like I was fairly prepared I was overwhelmed with the time factor. I felt as if I needed a different code book or text book for each problem. Texts where flying everywhere! I also felt like the exam writers seemed to focus on some odd (out of the mainstream) topics. I did not feel confident when I left, but I don't know who would after that eight hour exam.
My boss suggested that I take the civil test with the structural afternoon session. We had heard that the abbreviated section was more focused on basics and less focused on some of the obscure topics. I know these topics are not obscure to everyone, but at our firm we do not practice bridge design or pre-cast design (for example).
My undergraduate degree is mechanical... and I have been working for this structural firm since I was a sophmore in college.
My advisor seems to think I can 'pick up' the hydrology, traffic, and environmental portions of the morning civil exam.
Has anyone taken this civil exam that might have some thoughts?
Thank you in advance for your time and help.
My boss suggested that I take the civil test with the structural afternoon session. We had heard that the abbreviated section was more focused on basics and less focused on some of the obscure topics. I know these topics are not obscure to everyone, but at our firm we do not practice bridge design or pre-cast design (for example).
My undergraduate degree is mechanical... and I have been working for this structural firm since I was a sophmore in college.
My advisor seems to think I can 'pick up' the hydrology, traffic, and environmental portions of the morning civil exam.
Has anyone taken this civil exam that might have some thoughts?
Thank you in advance for your time and help.






RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
I did several Kaplan Review books for the structural exam and I felt as if the Kaplan books focused on entirely different subjects. The basic structural review manual focused heavily on the building system as a whole, lateral loads (development, application, and resisting systems), and seismic content.
Compared to what I had heard, I thought the seismic content on the test I took was low. I almost felt as if I would have been better prepared for the structural II.
COEngineeer, if you haven't taken the test yet I would recommend that you get a review book that is representative of the actual question format as well as something like the Kaplan. I did not work enough problems in the multiple choice format. I will either purchase the 6 min. solutions or the NCEES sample problem book this time.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
The afternoon problems on PE Civil (Structural) more general and, therefore, a little easier than Structural I problems.
The morning problems for PE Civil are are straightforward. The important thing is to study the basics of the five subjects covered in the morning. Whether you do this yourself (with a good study guide), or by taking a course is not too important - just do so, over a period of time - not just "cramming" in last few days.
www.SlideRuleEra.net
RE: PE: Structural I or Civil?
besides, it'll put some hair on your chest
LOL
RE: PE: Structural I or Civil?
If not, are you a "Structural Engineer" when you pass the Structural II?
These seem to be relatively recent developments and I haven't kept up. In California, Civil license and three years of experience with a licensed SE are prerequisite to sit for the SE exam. The SE exam has two parts, one is the national portion (NCEES) which I presume is equivalent to Structural II and the state portion which appears to be informally called Structural III.
RE: PE: Structural I or Civil?
Thanks for the advice. I have read many of your posts and you tend to make 'good sense.' I checked out the cable text on your site recently as well. It is a good reference.
I work for a former professor of mine... and I work with former classmates as well. Everyone told me many times that they had 100% confidence in me. I didn't agree, but it sure led up to a let down for everyone. I need to pass a PE test so that I can go back to finishing my master's degree in my 'free time'. I have already taken one semester off to study.
Swivel63,
I haven't yet decided what I will do. I feel like I could PROBABLY pass the structural I if I took it again. NCEES doesn't tell you what passing is, but I have a breakdown and I know that my weak points are concrete and masonry... mostly b/c they take me more time.
I don't want any hair on my chest, it would not look good with my two-piece swim suit.
Although I don't practice in a state where Structural I and Structural II, are a requirement... I would like to have the flexibility. Who knows, I may continue to torture myself and take both.
Thanks all.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
If you're going to take the Civil, I recommend getting the review CD-ROM from ppi2pass (in addition to the famous Lindeburg book). It covers the four non-structural discplines pretty well--as a review. I remembered nothing of my hyrdaulics, geotech, environmental, or transportation classes before I sat down with the CD-ROM, and a few days later had it all down pretty well. But I have no idea how well that would work for someone who'd never actually had any of those classes.
Another thing to keep in mind--if all your boss wants is for you to have the PE, you might not even have to take the structural afternoon portion (again, check your state's requirements in case you want to take the Structural I/II exam later). You may find some of the other stuff is easier once you look at it.
Hg
Eng-Tips policies: FAQ731-376
RE: PE: Structural I or Civil?
Don Phillips
http://worthingtonengineering.com
RE: PE: Structural I or Civil?
my state doesn't require the S1 to practice structural...but the flexibility of it is an added bonus for obvious reasons.
these tests don't really test your abilities or knowledge.....they just test how much crap you can fit in your brain in a few months....because lord knows i'll never use some of the stuff i had to learn.
i think there are products like nair if you want to remove that chest hair the S1 puts on you, lol.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
For what its worth, I have passed both the Civil and the Structural I test.
I found the civil test to be much easier, even though I have worked my whole career as a structural engineer on building type project. 'Picking up' enough surveying, open channel flow, retaining walls, geotech, etc to pass the Civil test is , surprisingly, not all that difficult.
If your only goal is to get PE stamp so you can call yourself a PE, this is probably the EASIER way to go actually.
( I guess that speaks volumes about using an 8 hour test as qualification for a PE, but that is a whole different subject. )
If you goal is to practice as a structural engineer for the rest of your career, then I agree with most of the other posters here. It is best to take Structural I exam and to plan on taking the Structural II exam in the future.
I fully agree with Swivel63. The test really have nothing to do with the practice of structural engineering. That may have been part of the reason you had difficulty. You were expecting something that tested you qualifications to practice structural engineering and protect the public with realistic problems that are encountered on a day to day basis in the profession. Instead you found out the test had nothing to do with that, and was put together by a group out to prove how clever they were in digging up obscure topics.
RE: PE: Structural I or Civil?
Yes, the test covers some pretty obscure topics, but I found myself a better engineer having studied for the exam and learned some new stuff--much of which I ended up using later. I still haven't designed any bridges (and don't really plan to), but I do occasionally sprinkle in terms like "AASHTO" and "HS20-44" into everyday conversations. . . .
RE: PE: Structural I or Civil?
I think it will come down to either flipping a coin... or determining what sort of hoops I have to jump through with the state board to take a different exam.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
Seems easier to go back and pick up something you were once thoroughly familiar with than to start on something new.
Also, check into which states you will ultimately need to be licensed- as in CA, for example, you need a CE degree, regardless of how many tests you take.
RE: PE: Structural I or Civil?
Although Georgia does not require separate disciplines at this time, it may in the future. You also do not know where you may be asked to perform work at some point in your career.
I agree with those who recommend sticking w/ the Structural I exam. It is a difficult exam, but it covers the breadth of what you should know as a structural engineer and unless you practice the items on the civil PE exam on a regular basis, you would be misrepresenting yourself as a Professional Structural Engineer. You have to ask yourself if in your pursuit of your PE license you are behaving ethically. I know engineers that have become PEs by taking advantage of the fact that there is no discipline listed on thier state's PE stamp and taken the civil exam instead of the structural I because they know they can pass the civil exam but are afraid they may not pass the structural I. In my opinion this is not ethical behavior.
You should not be afraid to fail this exam, just learn from this experience. Going into the next exam know your strengths and focus on the parts of the exam you had trouble with the first time and go at it again. Work on your speed, remember with 80 questions you only have 5 minutes per question. The solution is designed to be reached in this time peroid. If you don't know how to solve it in the first minute move on. Get the NCEES structural exam practice test from NCEES or ppi2pass.com and study the exam.
I know from personal experience what you are going through. I am a bridge engineer and when I took the exam the first time I was definately not prepared. Masonry timber, wind loads, snow loads and building design terminology were not things I dealt with regularly and I got creamed. When I recovered and began to study again I got some good references and study problems for these subjects and took the exam again. This time the exam had become the multiple chioce for AM and PM sessions and the questions were shorter, but I had not prepared for the intensity of the seismic questions and unfortunately missed passing by 1 point. I studied very hard to pass the third time and used my previous experiences as my study guide. The third time was the charm and I passed.
The point of my rambling is that you have to stick with it. The easy path is not necessarily the one you should choose. I have heard the quote "Nothing really worth having comes quickly and easily;
If it did, I doubt that we would ever grow. (Eknath Easwaran)" Consider this when making your decision.
Good Luck
Jim
RE: PE: Structural I or Civil?
keep in mind, i'm not in cali or illinois.
RE: PE: Structural I or Civil?
I saw a website today that said only ten states license SE's seperately (west coast and Illinois). They all require multiple tests. Some require any 8 hour NCEES exam plus S1 and S2... and some require a civil 8 hour NCEES exam plus S1 and S2. Looks like CA has a whole different set of tests (NCEES civil plus 21 hours of other tests). I can't find the link now that I am trying.
RE: PE: Structural I or Civil?
FWIW: In Nebraska, the structural engineers (through our Structural Enginners of Nebraska organization) and our Board of Architects and Engineers are currently having a long and vigorous debate on the subject of who may call themselves a 'Structural Engineer' and use 'SE' behind their name. Its been an ongoing 'discussion' for about 2 years.
The current drift seems to be that for new engineers, you will need to pass both SE I and SE II in order to be a 'Structural Engineer' and to use 'SE' behind your name. Those that 'only' pass SE I will be classified as a Civil Engineer and will put 'PE' behind their name.
There is an ongoing discussion of how to grandfather in older folks who have passed some test (Struct I or Civil) and have a liscense and some minimum additional time practicing structural engineering. The current proposal is that you will need at least a 'PE' registration and 10 years of qualifing expereince to be grandfathered in.
Currently, we do not have a Practice Act regulating who can stamp 'structural' drawings. So the deliniation is not important at the moment, but the clear hint is that eventually there may be a Practice Act limiting the stamping of 'structural' drawings to Structural Enginners.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
One thing I thought was extremely helpful in addition to all the study guides and practice questions that no one has mentioned yet... I downloaded a pdf by ncees that covers in detail what can be covered on the exam. You can find this at:
http://www
I printed off this sheet and basically did a detailed assessment of all of my strong and weak points, so I knew what topics I needed to study, and which ones I didn't. And as I studied and gained more understanding of my weaker topics, I was able to check them off the list as strong topics.
Hope this helps,
Jason
RE: PE: Structural I or Civil?
I have been told the SE is worth more than a masters….that’s just the way our big company thinks, right or wrong. If you have time, take all the tests. Ask your employer, maybe the will pay for them.
I too passed the SE I the first time around. My company designs all the materials on the test, plus aluminum and fiberglass structures.
Best wishes…Keep your chin up.
RE: PE: Structural I or Civil?
It's amazing, sometimes, the comments that come from people who fail a test, about the test.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
I tend to procrastinate with things so I plan on starting studying for the SE now. I can take the exam in October. Hopefully I only have to take it one time!! If not I'll take it again.
RE: PE: Structural I or Civil?
-Jack
RE: PE: Structural I or Civil?
With the current system, there is a lot more work and exams involved to be called an SE. Looking at the various salary surveys from trade magazines and observation of colleagues and beyond leads me to believe that civil engineers are better off than structural engineers, salary-wise.
RE: PE: Structural I or Civil?
I agree with you. Structural Engineering has evolved to where is should be a seperate acedemic major. Maybe someday we will get some 'love'.
That is interesting regarding salaries. I would say in my part of the country (Nebraska) the Structurals are definately better off salary wise. 10% to 20% better off. Around here Civils are not that hard to come by, but Structurals, especially those with more than a few years of expereince, are very hard to find.
RE: PE: Structural I or Civil?
I don't know how it is going to turn out, but I am really going to be ticked off if I have to go back and take the civil exam some day if I want to get registered as a civil in some state. So to answer your question, I don't know which one is better. Good luck!
RE: PE: Structural I or Civil?
Unless you are an owner/principal or as a minimum a senior level engineer, worker bees get a small portion of around 1% of the construction cost. Civil engineers dealing with building site grading usually make even less but ones in public works or transportation (private consultants on government projects) usually are better off. Both the bosses and the worker bees.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
Did you say you live in Georgia? I moved to Georgia having my PE from another state by taking the civil exam with the structural afternoon. When I applied for reciprocity for my GA license, it was denied since my experience was in structural and my test was in civil. The real kicker is you have to drive to Macon to take this lovely test. The 1st time, I got to experience a funeral in the room next door. No, not my funeral on the exam, but an actual funeral with a choir and organs and a firey preacher for 3 hours! This broke my concentration and I got the pleasure of trying again, and passing the next time easily.
My point is: if you are in Georgia and have experience in Structural only, they may not allow you to take the civil exam. You may want to call the state board and verify if you can take the civil before trying it.
RE: PE: Structural I or Civil?
<== thinking about moving from FLA to GA this year.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
You bring up a good point. When I applied for the exam in Massachussetts the board assigned me to the STR I exam based on my experience. When I recieved my MA PE it had a structural designation on it. When I applied to Georgia for a license by comity I was granted it without having to travel to Macon for an exam, even though Georgia only issues a civil PE. But if Cedent is already in GA I do not think she would have this problem. The issue may come into play when she applies to another state for her license by comity.
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
RE: PE: Structural I or Civil?
oh yea, i got my # today!
whoo hoo!!!!