I am looking for a manual for the design of conveyors. It must cover t
I am looking for a manual for the design of conveyors. It must cover t
(OP)
I am looking for a manual for the design of conveyors. It must cover the following: screw conveyors, belt conveyors, chain and bucket conveyors. I have seen two manuals from two different manufactures
1. The Jeffery Manufacturing Company Columbus 16,Ohio(Catalogue 418)
2. Link Belt Limited (Company)
New York
Both these manuals were printed in the 50's or 60's. Are there any updated versions, if so please let me know where I could purchase them
Thanks
Finite
1. The Jeffery Manufacturing Company Columbus 16,Ohio(Catalogue 418)
2. Link Belt Limited (Company)
New York
Both these manuals were printed in the 50's or 60's. Are there any updated versions, if so please let me know where I could purchase them
Thanks
Finite





RE: I am looking for a manual for the design of conveyors. It must cover t
CEMA (Conveyor Equipment Manufacturers Association)
932 Hungerford Drive #36
Rockville, Maryland 20850
301-738-2448
RE: I am looking for a manual for the design of conveyors. It must cover t
It is available from
K.Myles & Associates,
P.O. Box 2212, Northcliff 2115,
South Africa.
Phone (011) 678-1500
Another alternative is Conveyor Belting Technical Manual.
Irwell Works, Ordsall Lane, Salford, Manchester M5 4TD, Lancashire, England.
Telephone 061-834-6622
RE: I am looking for a manual for the design of conveyors. It must cover t
Title: "conveyors and related equipment"
by
A.spivakovsky and V.Dyachkov by Peace Publishers.
Title: Mechanical Conveyers: Selection and Operation
Author: Thomas S. Skocir , Mohammed E. Fayed ISBN: 1566764165
Publisher: Technomic Pub Co Date published: (October 1, 1996)
I was also on the hunt for some good design books for conveyors if you come across something please let me know
RE: I am looking for a manual for the design of conveyors. It must cover t
http://www.cemanet.org/publications/index.html