Small bore flanges
Small bore flanges
(OP)
Flanges
When piping engineer is developping material class specification for a service e.g Class 600 pound, size flanges less than 2 inch should be 2 rates higher than 600 pound which will be 900 and 1500 pond (same approch for valves). Can someone tell me which codes(ASMEB...) is this statment from ?





RE: Small bore flanges
BigInch
-born in the trenches.
http://virtualpipeline.spaces.msn.com
RE: Small bore flanges
Piping Classfiication Speiification 1) limited by B16.5; and or 2)Calculation.
RE: Small bore flanges