Rads on DIN 59410 and DIN 1022
Rads on DIN 59410 and DIN 1022
(OP)
If someone has the following DIN standards to hand , could they please look up the following please;
The Radii on;
Angle Bar - DIN1022 - 50x50x5 mm
Box Section - DIN 59410 - 70x70x5 mm
Flatbar - DIN1017 - 6x40 mm
Please specify if internal or external radius.
If have to Solid Model the Parts, may as well do it right!
Thanks
Speedy
The Radii on;
Angle Bar - DIN1022 - 50x50x5 mm
Box Section - DIN 59410 - 70x70x5 mm
Flatbar - DIN1017 - 6x40 mm
Please specify if internal or external radius.
If have to Solid Model the Parts, may as well do it right!
Thanks
Speedy




