Spot welding on Republic Seabee
Spot welding on Republic Seabee
(OP)
I'm looking for information on the details of the spot welding done on Republic RC-3 Seabee, a seaplane produced in 1946 and 47. More than 1,000 were made and many are still flying, and one of the keys to their low cost construction was the spot welding extensively used on the hull and flying surfaces. I'm looking for the process sheet if possible, but even if there's no such document, I'd really appreciate if you could shed light on the details.
Thank you very much in advance!
Thank you very much in advance!





RE: Spot welding on Republic Seabee
Maybe http://www.republicseabee.com/
RE: Spot welding on Republic Seabee
But thanks for the input, amorrison4!
RE: Spot welding on Republic Seabee
Here is our local one. There are links to other museums on this site.
http://naval.aviation.museum/museum.html
PS:
If you are in the area it is worth a visit.
RE: Spot welding on Republic Seabee
You might contact "Jane's" and see if they can help. I've been using them (in a non-professional way) for years.
http://jawa.janes.com/public/jawa/index.shtml
-or-
ht
Reinking