×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Gypboard/ Drywall Shear Walls

Gypboard/ Drywall Shear Walls

Gypboard/ Drywall Shear Walls

(OP)
I am looking into using gyp sheathed shear walls for an interior shearwall on a two story house.  Design is per IBC where wind controls.  Not seismic.  Placed on walls that will never be removed.  I know where to get the shear values, and how to design it, etc. I just want opinions about why not to use it.  Any bad experiences?

RE: Gypboard/ Drywall Shear Walls

I think gyp sheathing is fine, especially on an interior wall.  I have heard stories of gyp board deteriorating on exterior walls, but I think even that is a thing of the past now that products like Dens-Glass Gold exist.

DaveAtkins

RE: Gypboard/ Drywall Shear Walls

Well, GWB has a different seismic response depending on how you interpret the IBC you may be required to apply that R factor in a number of locations.

I have heard that over time with any movement GWB wall lose effectiveness as the GWB is brittle enough to flake off around the nail so you have some slop before the nails engage the sheathing.

RE: Gypboard/ Drywall Shear Walls

If it was my house I would use Plywood or OSB.  You can use gypsum most of the time to resist lateral loads and meet the code.

If it was my house I would want it to be the one standing after the tornado goes down the street.

I have also hear that in a seismic event the GWB will fail around the nails and reduce the wall effectiveness in future lateral events.

RE: Gypboard/ Drywall Shear Walls

I think quality control is a major issue.  The allowable load depends on the fastening to the wall studs, andd you have to make sure that the fastening matches the allowable load tables.  You say the wall will never be removed, but can you be sure?

I agree with what RARSWC says.

RE: Gypboard/ Drywall Shear Walls

(OP)
Understood, though, I'm designing the entire house per R=2 because of the gypboard which addresses the brittleness of the material.  The cooler nails are being required as the code states.

Unless they make a 2 family townhouse into an oddly configured 1 family mansion, no the interior wall in question will not be removed.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources