×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Strengthing of Existing RC Columns

Strengthing of Existing RC Columns

Strengthing of Existing RC Columns

(OP)
I would like to know the methods of Strengthing of Existing RC Columns excluding CFRP Method.

Thanks

RE: Strengthing of Existing RC Columns

One way is to drill and epoxy ties into the existing column. Add verticals doweled and epoxied to the foundation and the beam above. Add concrete section to column by poured in place methods or shotcreting.

RE: Strengthing of Existing RC Columns

Adding prestressing bands around the column or a steel jacket will give have the effect of increasing f'c due to confinement.

Regards,
Qshake

Eng-Tips Forums:Real Solutions for Real Problems Really Quick.

RE: Strengthing of Existing RC Columns

For bridge repairs in Florida, we often use reinforced concrete jackets (6" to 9" thick).  This is because of severe section loss, though.  Also, sesmic resistance is not a consideration.

If your goal is just increasing axial capacity, concrete alone might work (compression only). Surface prep and a good bonding agent are a must. Once bending starts, the tensile faces will be in trouble.

Regards,   RAF

RE: Strengthing of Existing RC Columns

Use an extreeme amount of caution when specifying any bonding agent.  I personally try to avoid any procedure that uses more than SSD preparation (Surface Saturated Dry).  Any bonding agent has to be used in a near-perfect manner or it is useless.  Any bonding agent applied in an abusive (read: incompetent) manner by a contractor will become a bond breaker.

Cheers,

YS

B.Eng (Carleton)
Working in New Zealand, thinking of my snow covered home...

RE: Strengthing of Existing RC Columns

In response to the previous email about bonding agents, remember that using CFRP in this instance (axial load capacity increase) is not "bond critical" - it is strictly for confinement and as long as the CFRP layers are lapped sufficiently, this fix will be effective regardless of bond to the concrete.  However, a sufficient bond is required for durability of the system.  I realize that the original question involved fixes outside of CFRP, but I suggest using fiberglass FRP - it will require more layers of material but the fiberglass is close to 6 times less expensive than the CFRP.  The Fyfe Company can help with this design and concept.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources