fault to ground
fault to ground
(OP)
I have a client with a 500' length of underground service
250 MCM aluminum 230 volt aluminum in which 1 of the hot legs has a partial ground.
not in conduit.
Does anyone know of a place to either hire a company to locate fault or where to rent equipment-------------------- such as a reflectrometer which measures length & giver
location in ft & inches to fault from end of cable
250 MCM aluminum 230 volt aluminum in which 1 of the hot legs has a partial ground.
not in conduit.
Does anyone know of a place to either hire a company to locate fault or where to rent equipment-------------------- such as a reflectrometer which measures length & giver
location in ft & inches to fault from end of cable






RE: fault to ground
RE: fault to ground
but rental doesn't matter,units are small
thanks
RE: fault to ground
http://www.hvmcorp.com
RE: fault to ground
RE: fault to ground
RE: fault to ground
Rich Realmuto
300 Vanderbilt Motor Pkwy
Hauppauge, NY 11788
Phone: (631) 630-2260
Fax: (631) 630-2292
Email: rrealmuto@99aetco.com
Website: www.99aetco.com
Elemco Testing Co.
Gail Justynowicz
10-46 46th Ave.
Long Island City, NY 11101
Phone: (718) 786-4900
Fax: (718) 786-6170
Email: gail@elemco.com
Website: www.elemco.com
Elemco Testing Co. Inc.
Robert White
505 Johnson Ave # C
PO Box 434
Bohemia, NY 11716-2612
Phone: (631) 589-6343
Fax: (631) 589-6670
Email: BobW@elemco.com
Website: www.elemco.com
HMT, Inc.
Peter Thiemann
P. O. Box 1957
Cicero, NY 13039
Phone: (315) 699-5563
Fax: (315) 699-5911
Email: pthiemann@hmt-electric.com
Website: www.hmt-electric.com
RE: fault to ground