Systems Design Engineering
Systems Design Engineering
(OP)
I graduated from the Department of Systems Design Engineering. It was a program developed in 1969 (undergrad level) to meet a projected need in the engineering world.
It doesn't seem that this field has happend or is likely to happen in the next 5 years or ever.
If anything it's a very senior position for someone with extensive lateral experience.
I'm a new grad so I don't know this, what would be the career path to become a systems design engineer?
Here is a snipet of the program description.
The Department of Systems Design Engineering has evolved over the years into a unique interdisciplinary department in Engineering. Its undergraduate curriculum represents a rational response to increasingly complex situations in modern technological society, involving not only technical, but also environmental, socio-economic and political factors. It is a well balanced program, designed to enable each individual student to find optimum solutions to multifaceted complex problems. A set of special interdisciplinary Systems Design workshop courses, stressing systems design methodology, forms an essential part of the program.
the descriton goes on and can be found here
"http: //www.syst ems.uwater loo.ca/Abo utUs/about us_whatiss ystems.htm"]
It doesn't seem that this field has happend or is likely to happen in the next 5 years or ever.
If anything it's a very senior position for someone with extensive lateral experience.
I'm a new grad so I don't know this, what would be the career path to become a systems design engineer?
Here is a snipet of the program description.
The Department of Systems Design Engineering has evolved over the years into a unique interdisciplinary department in Engineering. Its undergraduate curriculum represents a rational response to increasingly complex situations in modern technological society, involving not only technical, but also environmental, socio-economic and political factors. It is a well balanced program, designed to enable each individual student to find optimum solutions to multifaceted complex problems. A set of special interdisciplinary Systems Design workshop courses, stressing systems design methodology, forms an essential part of the program.
the descriton goes on and can be found here
"http:





RE: Systems Design Engineering
Sorry.
Having said that, defence and academia both would be fertile places to look for explicit systems engineer jobs, I've certainly seen a few ads for the former (and again thought, hmm interesting, I wouldn't mind doing that).
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Systems Design Engineering
Systems is a big buzz work in Aerospace & Defence.
In other industries it is sometimes known by other names (project engineering being one).
Most systems engineers started off as something else and evolved, I'm not sure there's that many who studies systems.
As far as career path, you need to be looking for a company that designs something complex enough to warrent dedicated systems engineers. Aerospace or defense would be good places to start.
RE: Systems Design Engineering
but the OP seems (to me) to be talking about general systems ("the big picture").
i'd suggest this would lead to project engineering, maybe government type agencies, maybe large civil type projects.
good luck
RE: Systems Design Engineering
One of my friends from university graduated as an Industrial Engineer and went on to work for a local hospital. Last I spoke with her, she was an operations manager for the University Health Network.
RE: Systems Design Engineering
That's what I meant by any company that designs anything complex enough to be considered a system. I guess design could be suplemented by maintenance.
RE: Systems Design Engineering
RE: Systems Design Engineering
I don't quite know what to make of a graduate from this System Design Engineering. I am guessing that the graduate is not as capable as a graduate from any of the traditional disciplines (ie, you are not as good in mechanical as a Mech Eng grad, but you would know more about electrical than a Mech Eng grad). Sort of like a jack of all trades, and master of none.
I would think that something like this is better suited to a graduate level course, where the candidates has a lot of experience in multiple disciplines.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: Systems Design Engineering
I've enjoyed the Systems Engneering I've done to date, but it's not as intellectually rigorous as understanding the plate equations is it?
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Systems Design Engineering
Don't get me wrong. I think systems are important, and can be as difficult and challenging as any traditional discipline.
I think also that it is more suited to a grad level course, after you have mastered one of the traditional discipline, and have gained sufficient experience and knowledge to appreciate the "inter connected ness" of all the disciplinesm, to work in a system, before such a course will make sense.
Then again, Greg may be right. I don't know what a plate equation is, so ...
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: Systems Design Engineering
In defence of my program, please understand that it is not a "general" course in engineering. In the case of my program anyhow, it was the hardest program to get into at the university (based on academic and extracirricular) and the cirriculum kept a relative pace so we would not sacrifice depth of understanding for breadth of knowlege. Our core encompassed the general engineering core required by all disciplines as well as crosslisted courses from other disciplines. There is so much overlap between courses of other disciplines that this is possible with a little extra workload. In addition our core included additional courses specific to design, optimization and complex systems modelling that other disciplines do not offer. Our available higher year electives included most electives across disciplines as well as our own discipline specific ones.
Because my program stressed design from many levels including things that many engineers forget about such as user needs. I would hope that this would make me just as capable as other engineers for many jobs. It's rare that a B. Eng or BASc uses every single tech electives course to do their job. That knowlege may help them understand what they are working on at a different level but the same can be said of my tech elecs, design and human factors courses.
As Greglocock has eluded to the engineers doing these jobs are senior level engineers who have been exposed throughout their careers to complex systems so that they learn to understand other engineering (and buisness) disciplines and through their work. That's the way our current engineering system works and I understand that. That's why I was asking about where to start off my career so I could eventually be doing what I was educated for.
RE: Systems Design Engineering
I've worked in a place where the systems engineering department was responsible for puting things together and testing them. I don't even know if those people were engineers. More of a technician job imao.
FYI I DO know what a plate equation is and it's in the core cirriculum of my program. Like really...how else can you model a plate in a mechanical system if you don't know how it will deform and effect the rest of the system?
RE: Systems Design Engineering
OK, to do proper systems engineering as a specialisation you'd be looking at aerospace or defence. But, at least in Australia, I haven't seen an entry level vacancy for them.
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Systems Design Engineering
RE: Systems Design Engineering
I think you just came across my point. You have a dabbling in a bit of everything, but not specialised in any.
If you were to have the same depth of knowledge as a Mech Eng, you would be a Mech Eng. Since your course load is similar to a Mech Eng, this is not possible, as you also touch on the other disciplines.
I am sure you are proud of your discipline. That is no reason to slander another. Your program is not the only one that stresses user needs.
Greg,
No offense. I think I will let you contemplate the plate equation - it really doesn't strike my fancy.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: Systems Design Engineering
civil - will tell you how to build it
mechanical - will tell you how to make it move
electrical - will tell you how to power it
systems - will tell you what colour to paint it
I have worked with people in telecom who had a systems degree who were doing digital board design. I think your work experience to some extent will enable you to do different things. As others have mentioned the potential problem with the systems eng degree is that you do not have detailed courses in any one area. I perform something of a systems engineering job at my company and I need to know bits about optical engineering, electrical (microprocessors mostly) and software. I think there is definitely a need for systems engineers, but you need to work in an industry long enough to gain some experience with the different areas that go together to build the system. Telecom equipment manufacturers need people who think in a systems manner. There are always problems when there is no systems group to make sure that all the work from the various groups integrates well. One suggestion I have is to get into a larger company where you can ask to rotate through different groups. I think GE does this with new hires. When I started at my company 5 years ago I basically tried to get experience in many areas, from component qualification, to hardware testing/design, to manufacturing testing to system integration testing, to system design. I'm not expert in any one of these areas, but I know enough about how each of the bits works now that when my group (the optical systems development group) hashes out ideas I can immediately understand the implications of our ideas on hardware and software.
Another question to ask is whether you even need to be a systems engineer. If you are so inclined you can take a MASc in one area and become a specialist at that. More and more it seems like industry is looking for people to fill certain specialty roles. Just make sure you don't do something too esoteric or you will be no further ahead.
RE: Systems Design Engineering
Is this what your coursework entails or entailed?
If so, there are a fair amount of opportunities out there; it just depends on where you live or want to live. Some of my friends went into consulting, which I tend to think is ludicrous if you have no experience in the working world. Others went into various manufacturing industries as IEs. Some went to work in gov't contracting fields focusing on programming and system simulation. Some went to grad school for their MBAs, and two went to law school (patent law). Hell, I know a few that went to work for Merrill Lynch in the strategic acquisitions area (buying up or turning around smaller companies for a profit). That's where the technical knowledge combined with management and accounting comes in handy.
Basically you end up being somewhat of a generalist, but your coursework likely positions you to focus on moving into plant or business management.
Close or no cigar?
RE: Systems Design Engineering
You have optic experts, programming experts, electronics experts, mechanical experts, design experts and so forth needed to build, say a cell phone. The systems engineer is there to coordinate and facilitate the combining of all of these discipline's work. Yes?
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: Systems Design Engineering
Wes C.
------------------------------
Light travels faster than sound. That's why some people appear bright until you hear them speak.
RE: Systems Design Engineering
But, Ashereng seems to want to propagate a notion of a generalist engineering program. For what reason other than to troll me, and hijack this thread, I have no idea. However his way of using other poster to support his argument by saying "as ___ alluded to" is putting words in someone else's mouth which I disagree with. It seems a little moronic for me to do this since I think most people who know what is required to get an engineering degree already know (everyone on this board), but I will attempt to correct this absurdness because it I am sick of it.
As triplez reminded us, the first 2 years is the same material and the last year is mostly a workshop. The engineering accredation board regulates the cirriculum of engineering degree courses and programs to ensure that all engineers meet a set "engineeing" standard. In a sense everyone was taking "general engineering" for the first 2 years.
That leaves a year of courses that defines one discipline from another. This year is composed of mainly technical elective courses. That is to say that it's possible for an electral engineer to have more in common with one mechanical engineer than another electical engineer. Stating that one is more "capable" at mechanical engineering as Ashereng does is an absurd generalization.
Again these courses are regulated to ensure that sufficient technical courses are taken so that the graduate engineer has a sufficient technical knowlege. A student cannot go ahead and take 1st and 2nd year courses for their 3rd and 4th years. For my 3rd year, I was not taking more 1st and 2nd year courses nor was I taking "general engineering 3rd year". I was taking high level engineering courses. Some of these were the same as 3rd year courses from other departments. Others were specific to mine focusing on mathematical systems modelling or design. Stating that one has more "depth" of knowlege is as Ashereng does is also absurd and would not be admissible for engineering accredation.
Does taking technical courses on mathematical modelling and user design make my program a "generalist" program? Perhaps if you are trying to pigeon hole it as either mechanical or electrical. Even then, considering the skills required for an average engineering job for undergrad degrees, many technical electives aren't aplicable and often times one technical elective is as good as another.
Please stop repeatedly refering to my program as a generalist course, it's incorrect, not the point of this thread and frustrating.
RE: Systems Design Engineering
Try not to take offense from Ashereng, I'm sure he is trying to be helpful, otherwise he wouldn't be posting.
To use myself as an example-- I have a degree in Material Science. This means I had to study a fair bit of physics, chemistry and even biology. But I don't have the same depth of knowledge in those subjects that a physicist, chemist, or biologist has. So no one would hire me as an inorganic chemist, for instance.
So you may not have the required education to do many Mech Eng jobs. But that's okay, because you don't want those jobs, otherwise you would have gotten a Mech Eng degree.
As to the best career path for a systems engineer, it sounds like the best advice you've gotten is to look in aerospace and defense.
RE: Systems Design Engineering
I apologise for offending. It was not intened.
Your OP asked "what is the career path to becoming a systems design engineer". It is hard to answer that if one does not understand the definition of a "systems design engineer". I am merely trying to understand what that term means.
As the many posts have indicated, it seems that "system design" engineer is mostly used in aerospace and defense industries, although others have alluded to a/c, industrial and others. I am merely confused as to what your discipline encompasses.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
RE: Systems Design Engineering
What classes in particular did you take? I know that as a Chemical engineer, I had to take a couple of MechE and EE courses, but not nearly enough to say I have as an indepth knowledge of EE as my EE roomate.
RE: Systems Design Engineering
A conceptual framework that
-is supported by a body of knowledge and tools
-partitions the system into manageable parts
-concentrates on interfaces between parts
-cascades requirements to subsystems
-ensures verification of requirements
A systems engineer typically coordinates the design of many sub-systems and finds the best way to assign the performance and functionality of each sub-system so as to maximise the benefit to the customer at minimum cost (defined various ways), while allowing the subsystem designers maximum freedom to explore cost-effective solutions within the constraints imposed by the overall design. (I just made that up)
Typically a systems engineer will work for a systems integrator (such as a modern car company) rather than the susbsystem supplier (eg the A/C manufacturer)
Here endeth the lesson.
In some ways the SE represents the customer's voice. As such he often gets involved with negotiations with the customer, which is why it tends to be a senior position. The SEs I have know have tended to be the ones who nail down the specs, deliverables, and technologies.
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Systems Design Engineering
RE: Systems Design Engineering
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Systems Design Engineering
Where I work, systems engineers fall pretty much in the line that Greg Locock outlines. They work up front with marketing and the customer to determine the customer's needs/wants and then translate them into design requirements. From that point they work with each affected discipline on developing, validating and integrating the work into a product.
The work requires a broad range of knowledge and the ability to pick up on nuances, interrelationships and details quickly. Not everyone can do this well and it tends to be a senior level position. After all, having to spend time training a systems engineer on certain aspects of the technology used in a new product tends to bode ill for success and timeliness of completion.
A good systems engineer, like a good project manager, can be the difference between life and death of a new product.
Regards,
RE: Systems Design Engineering
Gregs definition is great, from my limited experience systems endgineering seems to be getting the right people from different specializations to work together/talk to each other while understanding enough about each specialization to translate both between specializations and for commercial/business/customer types.
RE: Systems Design Engineering
I agree with Greg: I don't know a lot of systems or industrial PEs. Mechanical/electrical/civil, now that's another story.
Narfed, don't take too much offense. I spent most of my undergrad being an "imagineer" and an ISE: I Suck at Engineering. Being classified as a generalist isn't really that bad when you think about it. Can you adequately design engines? Probably not as well as some MEs. Same goes for the materials science fields, etc. But, do you know enough to integrate the knowledge of each of those specialties, manufacture a product in a cost-efficient manner, and market it to the public? This is likely where you'll focus your efforts.
I'm a youngster in the field of powdered metal. I'm not a metallurgist and I'm not a ME (both of which are desirable). However, I know enough metallurgy to develop my customer's products, enough knowledge of stresses/strains/elongation to design tooling, and enough manufacturing knowledge to know how to set up the line to make a profitable project. If I run into a problem I can't figure out, that's when I seek the help of a specialist within my company. Thankfully it hasn't happened much so far. I get to meet with customers, discuss parts, suggest design changes, buy equipment, etc. The advantage is that I'm not pidgeon-holing myself into a specific industry. You have the ability to learn from a breadth of disciplines and evolve as the market does.
Being a generalist ain't half bad if you can take the digs from your fellow engineers. Just learn to grin and roll with the punches.
RE: Systems Design Engineering
As to what Syssies actually do when they graduate, you'd have to ask somebody who has worked with one- I've never seen one "in practice". Suspect that a significant fraction of them end up absorbed by the general "business" culture/industry out there. They find jobs where the employers are looking for good analysis and communication skills rather than a particular technical skillset. That's pretty much the vision that many within the profession have for us anyway- engineering is supposedly "the new liberal arts education" rather than being a program of professional training. Makes me sick to my stomach, really.
There's nothing wrong with being a generalist- in fact it's very desirable- but you need to have some saleable skills to be considered an engineer in my books. It's OK to be a "jack of all trades" as long as you have a reasonable background so you can master at least one!
RE: Systems Design Engineering
In a meeting with DOE at Fernald, Ohio twenty years ago, a bunch of us chemical and metallurgical engineers were debating how to make a separation of solids from liquids -- whether to filter or centrifuge. One of the government managers (a Ph.D.) killed all meaningful discussion by saying: "Well I can see we need a systems approach here."
RE: Systems Design Engineering
If you’re going to build the next generation air traffic management system I think you want to take a systems engineering approach. Likewise with a multi-theatre guided missile weapons platform.
The question I have always had with Systems Engineering (SE) and Industrial Engineering (IE) is how do they break in? No sane plant manager would turn over his assembly line to a college graduate that has never held a full time job in industry before.
The benefit I saw in the six sigma programs was that they seemed to take people familiar with the operation, tasks, and environment to give them efficiency tools and empowered them to make changes.
I see IE and SE educational programs as being valuable for the senior technical track person, maybe at the Masters level.
I admit to not knowing enough much about entry level IE or SE oportunities.
RE: Systems Design Engineering
When I started, it was a little different. We were short-handed so I had a product line dumped on me. It was the red-headed step-child line nobody wanted to touch with a 10-foot cattle prod. Luckily I had some successes and learned a lot in the interim.
Anyways, if a company is properly setup, a fledgling IE or SE always has a mentor to work with until he/she gains enough experience.