10:1 ratio tools for high speed machine
10:1 ratio tools for high speed machine
(OP)
We are having a bit of trouble kellering deep pocket walls with tools that have 10:1 ratio length to diameter. Does anyone know what tool holders are more rigid. Deflection is happening even at slow feedrates. Spindle will go 24000 rpm max. We tried a .500 endmill .120 radius 10:1 ratio reduced tapered shank and even at 20 ipm we had alot of deflection. Any help we be greatly appreciated





RE: 10:1 ratio tools for high speed machine
Tim Flater
Senior Designer
Enkei America, Inc.
www.enkei.com