working plane
working plane
(OP)
Hi,
I've created a working plane and I would like my forces and displacements to be created I this WP. After the WPLANE command, I've added :
CSYS,4
CSWPLA,11
DSYS,11
WPCSYS,11
Then, when I create my forces, they seem to be placed correctly in this WP but when I ask ANSYS to solve, they are automatically reoriented in the original coordinate system![[sadeyes] sadeyes](https://www.tipmaster.com/images/sadeyes.gif)
Any idea?
thanks in advance!!
cheers
I've created a working plane and I would like my forces and displacements to be created I this WP. After the WPLANE command, I've added :
CSYS,4
CSWPLA,11
DSYS,11
WPCSYS,11
Then, when I create my forces, they seem to be placed correctly in this WP but when I ask ANSYS to solve, they are automatically reoriented in the original coordinate system
![[sadeyes] sadeyes](https://www.tipmaster.com/images/sadeyes.gif)
Any idea?
thanks in advance!!
cheers





RE: working plane
You have to rotated the node coordinate systems via nrot command in to your local coordinate system!
Best Regards Stefan.