Correct sizing of Compressor, Condenser and Evaporator for Cold room
Correct sizing of Compressor, Condenser and Evaporator for Cold room
(OP)
Can anybody offer any information about charts or formulaes applicable for correct sizing of the compressor, condensing units and the evaporator for industrial cold room in relation to the enclosed space to be cooled (including ante-rooms) and the cooling level required?





RE: Correct sizing of Compressor, Condenser and Evaporator for Cold room
RE: Correct sizing of Compressor, Condenser and Evaporator for Cold room
1. The HeatCraft design manual, a step by step design process for easy calculations at,
http://www.heatcraftrpd.com/service/handbooks.asp (go to Engineering Manual)
2. The cold storage design software from Keeprite,
http://www.k-rp.com/calcrite/RTcalc1.htm
RE: Correct sizing of Compressor, Condenser and Evaporator for Cold room
RE: Correct sizing of Compressor, Condenser and Evaporator for Cold room
RE: Correct sizing of Compressor, Condenser and Evaporator for Cold room