×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Design Scenario not changing values

Design Scenario not changing values

Design Scenario not changing values

(OP)
I made a design scenario with 4 sets for a frequency study.  In each set I changed two dimensions. (3/16, 1/4; 3/16, 2; 1/4, 1/4; 1/4, 2).  I ran the scenario but the results were all the same.  I don't get it because I just finished running a seperate design scenario with different changes that worked fine.

RE: Design Scenario not changing values

(OP)
I figured it out.  I was running the study on an assembly and the active part configuration was not the one used in the active assembly configuration.  That means that the dimensions of the part did not change between sets.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources