30msv6
30msv6
(OP)
dear sirs
one of microalloyed steels is 30msv6(according to pegeot standar).Recommended heat treatmet for yield(Min.580n/mm^2) and tensile is as followinh:
heating: 1100-1200o/C----> still in air
what means still in air?( is it important to know cooling rate)
Best regards
one of microalloyed steels is 30msv6(according to pegeot standar).Recommended heat treatmet for yield(Min.580n/mm^2) and tensile is as followinh:
heating: 1100-1200o/C----> still in air
what means still in air?( is it important to know cooling rate)
Best regards





RE: 30msv6
RE: 30msv6
Thank you for your answere,but Is it possible to have following mechanical properties for this steel grade when it cool in still air:
Yield point:Min. 580N/mm^2
Tensile:850-1000N/mm^
Best Regards
RE: 30msv6
RE: 30msv6
I think,your idea is that mentioned properties made in quenched in oil and then tempering.