SS Alloy identification
SS Alloy identification
(OP)
I'm trying to ID the weld overlay material used on the interior of a pressure vessel.
Mo .24
Ni 6.72
Fe 64.52
Mn 3.38
Cr 23.75
Can anyone assist?
Thanks,
Cam
Mo .24
Ni 6.72
Fe 64.52
Mn 3.38
Cr 23.75
Can anyone assist?
Thanks,
Cam





RE: SS Alloy identification
How thick? How many passes?
How did you do the analysis? Did you have good sample preperation?
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
http://www.trent-tube.com/contact/Tech_Assist.cfm
RE: SS Alloy identification
Single pass
Niton Xlp 800
RE: SS Alloy identification
The Cr seems high for the Ni and Mn.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
http://www.trent-tube.com/contact/Tech_Assist.cfm
RE: SS Alloy identification
Michael McGuire
http://stainlesssteelforengineers.blogspot.com/