Filler metal for GTAW of SA-333 gr. 3
Filler metal for GTAW of SA-333 gr. 3
(OP)
Want to be sure I'm not over simplifying things for a B31.3 job, on a 4" XXH joint with GTAW (root) and SMAW (balance). If I use ER80S-D2 GTAW and E8018-C2 SMAW, is that "overkill"? Any input would help.





RE: Filler metal for GTAW of SA-333 gr. 3
RE: Filler metal for GTAW of SA-333 gr. 3
RE: Filler metal for GTAW of SA-333 gr. 3
Sorry
RE: Filler metal for GTAW of SA-333 gr. 3