ITAR statement on drawing title block - USA Only
ITAR statement on drawing title block - USA Only
(OP)
I am working at a small company which does engineering design and testing for many different clients. Lately we have had a few contracts that were covered under the ITAR rules of the US Government. AS it stands right now, we are stamping our drawings with a red ink stamp that says "ITAR Restricted" but it seems to me that there ought to be:
a.) a more extensive statement, and
b.) something incorporated into the title block (so it appears on every drawing we (or others) print without having to remember the stamp.)
Without trying to pry into others proprietary information, can anyone give me either the text they are using or a link to a site or the section of the specs which provide this text?
a.) a more extensive statement, and
b.) something incorporated into the title block (so it appears on every drawing we (or others) print without having to remember the stamp.)
Without trying to pry into others proprietary information, can anyone give me either the text they are using or a link to a site or the section of the specs which provide this text?





RE: ITAR statement on drawing title block - USA Only
RE: ITAR statement on drawing title block - USA Only
Also, I think that this is covered or referenced in Y14.100 or DOD 100. I'll have to check them when I get home this evening.
I've seen some prints in my other life that just have a reference in the general notes to ITAR. Something like... "this data/document contains information that is governed by ITAR etc"
RE: ITAR statement on drawing title block - USA Only
RE: ITAR statement on drawing title block - USA Only
Chris
Systems Analyst, I.S.
SolidWorks/PDMWorks 05
AutoCAD 06
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716