×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

rewind data

rewind data

rewind data

(OP)
Does anyone know how I could find rewind data for a 3hp single phase motor, capacitor start and capacitor run?  wire size, number of turns, and span?  
Thanks

RE: rewind data

The easiest way is to look at the old motor before you strip it out. Is it too late for that?
yours

RE: rewind data

You must provide data. At least all nameplate or nominal data, Manufacturer, Voltage, rpm, frequency, frame size, enclosure type, etc. Then bore dia, core length, number of slots, are all slots with the same area or size? Rotor OD,  capacitors data. Your input is to vague for an answer.

RE: rewind data

Hi
  We may be able to help with winding data if you have all the plate details of the motor...it may be in our winding archives. Let me know...
             Jeff
         www.motors-direct.co.uk

RE: rewind data

(OP)
basically we have had a single phase 5hp baldor running in our well pit almost continously for 30 years.  It finally needed some work to the centrifical switch.  I just want to do some experimenting with a 3phase motor that has the same number of slots(36) and rewind it to single phase to see how good or bad it works.  I want to compare the winding data of a 3hp and 5hp single phase.   
I looked on the Baldor website and it looks like the motor we have running in the well pit  is 5hp, single phase, 215 frame, farm duty.  The catalog number on the website is FDL3731M.      I would like to have the data on a comparable farm duty motor like this, but only 3hp to compare.  The website doesn't list a 215 frame for a 3hp, so I am not sure what motor it would be.  I just know it has to be 36 slots.
Thanks

RE: rewind data

In that size it is usually cheaper to buy new than to rewind.
A problem with the three phase frame is the lack of a centrifugal switch. You may be able to install a centrifugal switch or use a potential relay or a current relay to switch the starting winding. This will add cost to an already overpriced project. If this is a "cost-no-object", "Do it yourself learning experience", please post your results. It's nice to know how things are working out, out in the field.
respectfully.

RE: rewind data

If you provide the RPM, stator length &  I.D., I may be able to post data close to those specks for each.

RE: rewind data

(OP)
Hi SteveKW,

Is there a program I can get that will help me design the windings if I tell it the dimensions?  I know ther are 3 phase software programs out there, but are there single phase?
Thanks

RE: rewind data

There are books for design from stator dimensions I can look at.
I need dimensions though!

RE: rewind data

(OP)
Thanks Steve,
When I get strip the 3 phase motor down, I will get you all the dimensions.  

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources