Need Plotter/printer advice
Need Plotter/printer advice
(OP)
I just took over as IT support mgr for an engineering firm. They currently have an old KIP America 4900 printer that when it works, prints very fast. But, it seems that the design of the plastic gears tends to have it down every couple months for repairs....
Any suggestions on good, fast, reliable printers for autodesk projects (cadd)... large format paper size... just for black and white (our HPdesk jet handles the color just fine)....
jilltre
Any suggestions on good, fast, reliable printers for autodesk projects (cadd)... large format paper size... just for black and white (our HPdesk jet handles the color just fine)....
jilltre





RE: Need Plotter/printer advice
We're using an HP Designjet 1050c - it runs about 15-20 30x42 sheets an hour, fully networked, handles up to 36" rolls, with decent print quality. We're printing an average of 50-75 pages/day. Service calls have been pretty minimal, and they've fixed the magenta-ink-formulation issue that dogged 'em when they were first released. Downside is that one of 'em will cost you $7k-$10k.
RE: Need Plotter/printer advice
We would be looking at replacing that.
RE: Need Plotter/printer advice
http:/www.oce.com
RE: Need Plotter/printer advice
Thats after 45 years of Oce Bruning. MIS is now in charge and we are saving about $150 a month.
Mike