Taylor Forge catalogue #571
Taylor Forge catalogue #571
(OP)
I need dimensions on 26" 600# raised face flanges that were built in accordance with the flange dimensions on pages 76 and 77 of the Taylor Forge catalogue #571.
orin.carman@alonusa.com
orin.carman@alonusa.com





RE: Taylor Forge catalogue #571
ht
RE: Taylor Forge catalogue #571
RE: Taylor Forge catalogue #571
Not shown is the weld bevel that is normally 37.5° with a 1/16" land.
http://www.lyncoflange.com/public/fl_08.htm