×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

HV power supply
3

HV power supply

HV power supply

(OP)
whats the best place to find a HV power supply

output 100KV DC at about 10-30 Watts

are there any step up transformers for DC

RE: HV power supply

Transformers don't work for DC.

Glassman are an old established manufacturer of EHV power supplies, but there are dozens of others if you search on Google.

These PSU's turn up from time to time on the surplus market too.

----------------------------------
  I don't suffer from insanity. I enjoy it...

RE: HV power supply

(OP)
what about rectifier transformers

also i have heard about voltage multipliers, what are those?

RE: HV power supply

If you want to start with DC and generate a high voltage DC then you need a oscillating or switching circuit inbetween to drive a transformer and/or a voltage multiplier circuit. Voltage mulitpliers are an array of diodes and capacitors that take a AC input and create a high voltage DC output.

Modules to take 12 to 24 VDC and step it up to ~8000 VDC are fairly common for powering photomultiplier tubes or CRTs. Creating more than 50kVDC begins to get a little unusual. Above 200kVDC you're in the Van De Graf generators.

Look at this site or search "high voltage power supply".
http://www.amazing1.com/hv-dc-power-supplies.htm

RE: HV power supply

Hi guys....My first share....Q. for Jag27:  Is th supply u need, have to be variable?? or is it steady @ 100KV..I am using EMCO high voltage modules which "Comcokid" is mentioning abt...it drains 12v/500mA to produce 450V /8mA.In my case the whole supply has to be varible depending upon the code from uC.....Voltage multipliers didn't work for me since they do not offer me the flexibility of voltage variation in analog way.....Depending upon the requirement, yr design can simplify or complicate...

RE: HV power supply

europus2002,

Your spelling is awful - and sadly it is intentional! Please LEARN TO SPELL, like the rest of oldies who don't use 'txtspk'. A lot of users don't have English as a first language, so abbreviated words just make things unnecessarily difficult for them and for those of us over the age of 30.

Otherwise - welcome to Eng-Tips!

----------------------------------
  I don't suffer from insanity. I enjoy it...

RE: HV power supply

I apologise scottyUK...I will take care next time i post and thank you for bringing the situation to my notice...i can understand the frustration but couldn't realise the problem it would be causing to other people....

RE: HV power supply

(OP)
i need a steady 100KV dc at output

thanks

ps. i dont care about the spellings so long as u get the point across

RE: HV power supply

Hi jag27, In your case, the most practicle method of achieving this would be using an EHT (Extra High tension) transformer also known as flyback transformer used to generate high voltage in the range of 7Kv to 30Kv (incase u don;t know). And at the boosted +B (secondary side) use voltage multiplier configuration to push the supply from around 25Kv to 100Kv. The supply voltage & current required for switching transistor at primary side of EHT should be around around 35W and above. Keep the supply voltage for switching transistor as high as possible to avoid heating of power transistor or use ultra low-ON resistance MOSFET..like IRF640 or similar...The frequency required for switching will be in the range of 13KHz to 35KHz depending upon what EHT you use.. ....Feel free to drop back if more info is needed....

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources