×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Career in the defense industry
2

Career in the defense industry

Career in the defense industry

(OP)
Hey all,
I'm a relatively fresh mechanical engineer (about 3 years out of univ). Ever since I was a kid I was interested in defense technology, I went into engineering primarily b/c of it, why am I not in it now? Long story.

Anyway I was wondering if anyone knew how to get into the defense industry as a young pup.  

RE: Career in the defense industry

It's who you know, not what you know.

Defense is a big industry.  What specific portion are you most interested in?  Aerospace, missiles, satellites, airplanes, helicopters, Army, Navy, Air Force, Marines, thermodynamics, strength of materials, composites, design, analysis, production systems, development, and the list goes on.

--Scott

For some pleasure reading, try FAQ731-376

RE: Career in the defense industry

(OP)
Hmm I never thought about what particular part I want to go into. Perhaps minimal force maximum output type stuff, remote planes, hi-tech infantry equipment etc etc. Ideally I want to work in defense trade and international defense analysis, so I figure that getting technological experience in the field will be a good idea.

As for knowing people, it's too bad that we immigrated to Canada, b /c my father worked with alot of people in the defense industry back in the day.

RE: Career in the defense industry

If ypou want to work in the defense industry, then identify firms that do DOD work - but this is kind-of obvious.

Location is a question you should be asking - where do you want to live & work;  or where is the type of work you want to do located?

Last, but perhaps most importantly - you must have the capability of getting a DOD security clearance.  If you're not a US citizen, its extremely difficult.

RE: Career in the defense industry

(OP)
mshimko,
I don't care about where I live and work too much, as long as it's not somewhere cold ie. Minnesota.
I'm a Canadian citizen so I am looking at the Canadian defense industry, I've also done work in the nuke reactors here, so I have Canadian security clearance...it makes the border crossings much easier :) .

RE: Career in the defense industry

Come down and join Marines.  You can get some hands on with some high tech infantry stuff and get paid for the training.  The best design engineers I know have all spent time on the shop floor learning how the equipment works first hand.

Barry1961, Semper Fi

RE: Career in the defense industry

Excellent suggestion, Barry. It is very unlikely that someone can become a really good design engineer without some real world experience in operating and maintaining the type of equipment that will be designed. There are many different ways of getting experience, including work on hobbies.

RE: Career in the defense industry

(OP)
The Canadian forces tried recruiting me right after I graduated, I wasn't too keen on joining then...too bad b/c about a year later I went to a local base's engineering corp and found out that all they really do is sit around and umm do nothing, much like other government engineering positions around here...dammit, I shoulda joined, it would have been fun.
And yes I agree that actually having a hands on feel is the best way to learn about the equipment, however I don't want to design weapons...well maybe some weapons, what I really want to do is get into the economics/trade/international comparatives of defense technology.

RE: Career in the defense industry


ziggi
You say you want to be in the defense industry - but you don't want to design weapons .... I see a kind of paradox here.

I have worked in the industry for over 30 years and it's where the best and most advanced technology happens. In fact my company makes hospitals (military ones) and is into fuel cell technology, UAVs and lots of other interesting things ..... but you have to be clear about a fundamental fact of life:

The defense industry, in any country, any part of it, exists for the purpose of killing people and destroying things. It's not defense, it's primarily offensive. Start in one division, and you may end up designing weapons. If you don't have the stomach for it, don't join (just like signing up to the military).

I appreciate some contributors may have different views, so listen to them too. I recruit engineers for my department and this is the first thing I put to them at interview. I would rather be up-front and honest about my company's defense interests than hope the recruit will be able to rationalize it later.

RE: Career in the defense industry

(OP)
harrisj,
Don't get me wrong, I don't have any high minded ideal about the defense industry, I am aware that the things I would be working with will more than likely be used to kill people, does it bother me....not really. Anything I may design or sell in any other industry is likely to destroy something, in the defense industry this link just happens to be less opaque. I've already spent quite a bit of time mulling this moral issue over.

I have had exposure to military weaponry before, in fact it was one of the reasons I went into engineering. My father was an engineer with the South African government's defense industry. My childhood summers were spent clambering around tank hulls, watching ejection seats being tested, and seeing wind tunnel testing. My brother-in-law was also an officer in the South Africa Police Force, so by the time I was 12 I had already tried out an assortment of automatic weaponry and I was fully aware of their capability. (The restrictions were a bit more lax in South Africa, back then).

I don't mind doing design work, and I would probably enjoy it immensely. However my experience with design work has been restricted to a computer monitor and calculator. I understand that those are essential tools, but I also know that actually holding and using the technology, or its predecessor, are very important aspects too. Ideally I would want to go out on maneuvers and speak to the people using the equipment and see what they feel would work best, whether it's for a local defense force or a client state, ie. I want to be a sales engineer of sorts.

My point is that I have already had experience with the defense industry and that I feel no qualms about working in it.
I don't want to do design work because it will restrict me to an office. I feel that exposure to the equipment's environment and to the people who will be using it is just as important as the actual design.


BTW, what sort of qualifications does one need to work in the defense industry? Other than an engineering degree and a dose of pragmatism.
And how has the industry treated you?

RE: Career in the defense industry

ziggi:

I'm pleased that you have come to terms with the moral dilemma of working in defense. Everyone needs to do this on their own. I'm happy with it and with the industry which I have worked in since 1975. It has treated me pretty well although defense expenditure cutbacks are hitting hard here in UK and I hear in US as well.

You say:
 "I don't want to do design work because it will restrict me to an office. I feel that exposure to the equipment's environment and to the people who will be using it is just as important as the actual design."

That's what every good design engineer should do. The drafter may stay in front of his PC but the engineer should be familiar with the real world and how people use the equipment. Go on exercises with the military (especially Army) and your priorities as a designer will change. What seemed like an elegant solution in the office is strangely un-useful when it won't work because you're cold, wet, tired, miserable and someone's firing bullets at you!

An engineering degree and the dose of pragmatism is a pretty good start to a fulfilling career as a designer in the defense industry.  Enjoy.



RE: Career in the defense industry

(OP)
harrisj,

Quote:
"What seemed like an elegant solution in the office is strangely un-useful when it won't work because you're cold, wet, tired, miserable and someone's firing bullets at you!"

That's half the fun ;)  If it were up to me I would be right there on the ground with the grunts, zip lining, crawling around in mud and generally being a nuisance. It's the best way to test anything.

Do you have any suggestions for how to get into the industry?
I cannot take the military route, for medical and financial reasons.

RE: Career in the defense industry

What I'm suggesting is that if you're in the industry you should (eventually) get the opportunity as a civilian to attend / observe / participate in military exercises, or at least tests and trials. Don't expect this in the first week, though.

As for suggestions for getting in to the industry, I only have knowledge of the UK. Over here, the big defense companies (there's only BAE Systems and Thales - they've bought most of the smaller companies up) have graduate recruitment schemes. It is often easier (and more fun) to apply to smaller comapnies who contract to the big boys.

While the US defense industry is also dominated by big names, there are plenty of small firms who might take you on. Find out who are exhibitors at the big defense trade fairs, and write to them. Once you've got a foot on the ladder, you have some defense engineering credentials, and you can move onward and upward. Good luck.

RE: Career in the defense industry

Try USAJobs.com... civilians working directly for the military, typically on-base.  Don't know if there is a Canadian equivalent though.

RE: Career in the defense industry

There are plenty of defense companies in Canada, many of which supply both the US and Canadian defense needs.  You could start at:
http://www.defenselist.com/directory/defense/
and see which ones have divisions in Canada.  

TTFN



RE: Career in the defense industry

"Security Clearance Job Fairs".

I see these occasionally advertised in the Washington DC area.  They are aimed at Department of Defence contractors and prospective employees.  Current security clearances are not typically required, but they help (my daughter got her first job out of college through one of these, but she was lucky to have a clearance from a previous position as a paid intern).

I'm not sure how common these type job fairs are in other areas.  You could research these job fairs and travel to the DC area to attend one,  it may be a way to talk to a number of firms in one or two days.

RE: Career in the defense industry

(OP)
Thanks for all the info gents, I really appreciate all your help.

BTW are there alot of defense companies located in Washington DC. I ask b/c I plan on going for my Master's (Business Admin and International Security Studies) there in a few years.

RE: Career in the defense industry

"Are there a lot of defense companies located in the Washington DC area?"

I doubt if a national defense company exists that doesn't have at least an office in the DC area.  You name the company, and they probably have hundreds, if not thousands, of employees in this area.  

There are two reasons:  this is where the decisions are made (the Pentagon, congress), and this is where many of the larger military commands are located.

There are drawbacks, mind you.  Cost of housing,  congestion and traffic, can't get away from Washington politics, etc.  

RE: Career in the defense industry

There are a number of companies ("Beltway Bandits") that service the Pentagon and the Army laboratories at Fort Belvoir in the DC area and the Army Materiel Command located in the same area.

Maryland has the Aberdeen Proving Ground.

Further north Are Fort Monmouth, NJ and the US Navy's Lakehurst, NJ facility.

TTFN



RE: Career in the defense industry

There are Jobs with the US army, navy, and air force working in aircraft maintenance.  I am not sure, but I suppose there are maintenance engineering jobs for other fields as well.  Check on usajobs.gov.

RE: Career in the defense industry

So straight out of University (1999) in the UK I did the following.

Wrote off with a CV to all the larger aerospace/defense companies I could think of in the UK.  (I’d actually applied to some while still at uni)

I then looked at a copy of the “Society of British Aerospace Companies” member directory at the local library.  I went thru it sending CV & cover letter to every company that looked remotely interesting.

Eventually got 2 companies interested in me.  At the time one of them was probably the second or third biggest in UK while the other was fairly small.  The small firm was quicker at giving me an interview & offer so I took it.

I was a Design engineer.  I spent a relatively small proportion of my time at my desk working on CAD.  The range of activities I spent the rest of my time on was fairly long but a bunch of it was customer liaison & trials (including abroad).  We emphasized trying to get input from users and employing former users to get their input at the design stage.  I wouldn’t go so far as to say (former) users always make the best designers but their input was invaluable.

It was a great job, wish I was still there many days.

I’m now in the US and have pretty much given up on getting into the aerospace/defense industry until I have citizenship.

From my research (and responses from companies that were interested) it is officially not possible to get a full US clearance as a non US citizen.  If you’re really something special you may be able to get clearance on a by program basis but it seems you need to be Von Braun or someone for this to actually happen these days.  Bear this in mind if you’re looking at coming to the US and aren’t a citizen.

RE: Career in the defense industry

That's pretty accurate, I think.  We just nixed interviewing someone who turned out to be a non-citizen.  Much of the issue is that even non-secret stuff cannot be exported to "foreign persons" per ITAR, so in aerospace, and defense in particular, a non-citizen can't even work on some of the unclassified stuff.

When I worked at MDC, they used to use red stripes across a non-citizen's badge to denote "Agent of a Foreign Power."  Was definitely a conversation stopper.

The big problem right now is that there is a huge backlog for getting clearances, so any item that raises a flag is just going to make everything that much worse.

TTFN



RE: Career in the defense industry

Note also, that if you have immediate relatives in annoying countries, that can stimie your clearance as well.

TTFN



RE: Career in the defense industry

The ITAR is definitely an issue.

For a while after moving to the states I still did free-lance work for my previous UK employer.  However, with changes and stricter enforcement of ITAR regs this was starting to become an issue.

Also Just being in a building or part of a building where remotely sensitive stuff is going on can be a problem without clearance, like the red stripe on the badge issue.  Having to be escorted every time you want to use the restroom or photocopier gets old.

RE: Career in the defense industry

TTFN - I just went through an interview for a friends clearance.  I asked about that.....I was told that it adds a lot of time to the entire background investigation.  I got my clearance in three months due to being ex-military.

RE: Career in the defense industry

i have a uncle who works at rathyeon and he said it's very cool job you might want to check it out.

 p.s. he works on defense projects

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources