Cutting bronze question
Cutting bronze question
(OP)
We have a new Bystronic ByStar 4400w laser. A local bronze foundry is wanting us to cut some bronze for them at 3/16 in thick. Can someone give me some insight on doing this?
Thank you,
Kevin
design@wallowa.us
Thank you,
Kevin
design@wallowa.us





RE: Cutting bronze question
Have you spoken with Bystronic applications? I was just speaking with the Applications Manager and he said they should be able to help you out. Please call them at 800-247-3332.
Regards,
Jeff Day
Regional Sales Manager, Bystronic Inc.
----------------------------------
Bystronic Inc.
185 Commerce Drive, Hauppauge, NY 11788
Phone 440-243-4856, Cell 216-533-9142, Fax 440-239-1875
jeffday@mycingular.blackberry.net; www.bystronic.com
RE: Cutting bronze question
Thank you,
Kevin
RE: Cutting bronze question
I do not have any experience with bronze but I have learned to trust the Apps Engineers at the manufacturers. After all, they , in most cases, do the demos that provide acceptible results that result in the sale of the product.
Hope this helps,
Scott
In a hundred years, it isn't going to matter anyway.