Pro/E: stl file into surfaces
Pro/E: stl file into surfaces
(OP)
Is there a way to convert an ".stl" file into surfaces in Pro/Engineer 2000i2?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
Pro/E: stl file into surfaces
|
RE: Pro/E: stl file into surfaces
Try convering the file into IGES and then try to export to pro/e.
This may work
mechm