setting up a hp deskjet to nx
setting up a hp deskjet to nx
(OP)
Trying to get a HP deskjet 9659 inkjet plotter working with nx2.Think I'm having problem with the correct plotter switches setting. here's my current settings in order on Pqmgr:
Despooler name =UGIIHP
Plotter Vendor =Hewlett-Packard
Plotter Type =Electrostatic
Number of pens =8
Controller ID =
Plotter Model =9659
Plotter Switches =/AR/AS/17/MO/BS=0.0x0.0
Media Control =Continuous
Distance between Plot =0
Output Mode =Queue
Plotter Com Line =
System Queue Name =\\nickel-serv\hp9650
Directory Pathname =
Tape Density =1600
Message Interval =
Message Com Line =
Horizonal Maximun =0
Vertical Maximum =0
Steps per Inch =1420
Optimization Level =None
Thanks in advance for any help,Dan
Despooler name =UGIIHP
Plotter Vendor =Hewlett-Packard
Plotter Type =Electrostatic
Number of pens =8
Controller ID =
Plotter Model =9659
Plotter Switches =/AR/AS/17/MO/BS=0.0x0.0
Media Control =Continuous
Distance between Plot =0
Output Mode =Queue
Plotter Com Line =
System Queue Name =\\nickel-serv\hp9650
Directory Pathname =
Tape Density =1600
Message Interval =
Message Com Line =
Horizonal Maximun =0
Vertical Maximum =0
Steps per Inch =1420
Optimization Level =None
Thanks in advance for any help,Dan





RE: setting up a hp deskjet to nx
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
Sr IS Technologist
L-3 Communications