Reference document for Is-Limiter
Reference document for Is-Limiter
(OP)
Does anyone has the following documents relating to a fault current limiter?
1. T. Keders, "Aspects Concerning the Determination of the Operating Value in Applications of Is-Limiters"
2. T. Keders, "The Determinatino of the Setting Values of Protective Devices with di/dt Tripping in 3-Phase A.C. Networks"
I had contacted the manufacturer to get these documents but I couldn't get these yet.
Thanks in advance.
1. T. Keders, "Aspects Concerning the Determination of the Operating Value in Applications of Is-Limiters"
2. T. Keders, "The Determinatino of the Setting Values of Protective Devices with di/dt Tripping in 3-Phase A.C. Networks"
I had contacted the manufacturer to get these documents but I couldn't get these yet.
Thanks in advance.






RE: Reference document for Is-Limiter
My Cogen project is located in Malaysia within a refinery and we have designed our 33 kV system with Is Limiter between our Cogen to Grid system - mainly to limit additional short circuit currents which otherwise would exceed our existing 25 kA-rated 33 kV equipment.
http://www.abb.com/global/abbzh/abbzh251.nsf!OpenDatabase&db=/global/seitp/seitp328.nsf&v=9AAC720001&e=us&c=C1256CCB004E3ABBC125698C00553A43