Threading
Threading
(OP)
Does anyone know if it is possible to show threads in 3D drawings? And if so, what are the commands to utilize in doing so?
Mike
Green Mountain
Mike
Green Mountain
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Threading
You can, you'll need to create them yourself though. Go to either www.caddepot.com or www.cadshack.com and search for sprial.lsp or 3dspiral.lsp. This will create a 3dpoly line spiral. You'll use this to extrude your threads for your bolt.
HTH
Todd
RE: Threading
like roun wire springs
RE: Threading