center mark......
center mark......
(OP)
how does one go about creating a center mark for a hole and/or arc in a drawing.
Thanks
Thanks
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: center mark......
Best Regards,
Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)
"Coming together is a beginning, staying together is progress, and working together is success." - Henry Ford
RE: center mark......
RE: center mark......
sorry if it felt like ground hog's day.
RE: center mark......
On another note from your previous post, you should be showing your dimensions instead of creating them on your drawings. This way you will keep your parametric relation between your drawing and part plus also make it easier to make modifications later on. I understand it is not always possible, but is good practice. I've attended a few classes and they never pushed this enough.