×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Resources for a gentle introduction to chemical engineering

Resources for a gentle introduction to chemical engineering

Resources for a gentle introduction to chemical engineering

(OP)
What resources do you Chemical Engineers recommend for the gentle introduction to the subject for someone with a solid back ground in Control Theory?

Thanks in Advance.

RE: Resources for a gentle introduction to chemical engineering

knji....

I suggest the repetitive viewing of an old movie "The Lawnmower Man" about six or eight times.

That should about do it......

http://www.scifimoviepage.com/Lawn.html

My opinion only

-MJC

  

RE: Resources for a gentle introduction to chemical engineering

knji,

I don't think a gentle introduction really exists...  For the most part, I guess you could simplify chemical engineering into material and energy balances with a mixture of fluid dynamics and chemical reactions.  A good introductory book I refer to every once in a while is...

Elementary Principles of Chemical Processes by Richard Felder & Ronald Rousseau

There are several Fluid dynamics books out there.  Finding a decent one isn't that difficult.  I don't have my Kinetic's book in front of me, but given that I don't even like to open it, I don't figure you'd want to either...

Hope this helps.

jproj

RE: Resources for a gentle introduction to chemical engineering

If your slanted toward the refining industry, Pennwell has a good series of books. I usually start my people off with "Refining in a Non Technical Language", the catalyst one is fairly good too.

RE: Resources for a gentle introduction to chemical engineering

knji:

jproj is correct.  There is no “gentle” or “compassionate” method to learning or associating with the Chemical Engineering discipline.  This part of engineering is just too diversified and broad to nail down without going through the entire, taxing, and tough curriculum taught at most top universities.  The diversified curriculum makes it difficult to know what specific area of Ch E studies you are interested in or think you have an interest in.  From the brief description of your background, I would assume that you are interested in pursuing Ch E training in process control and its applications – perhaps.  If so, then you can stay away from the Kinetics, the Organic and Physical Chemistry, the abundant amount of Thermodynamics, Plant Design, Optimization, the Unit Processes, etc., etc.  Control Theory would take you to the area(s) of Unit Operations (and others closely related.  This helps in narrowing the field.

If that’s the case, then reading and enjoying such classic books by Greg Shinskey, like:

“Process Control Systems”; 3rd Edition; McGraw-Hill;
“Distillation Control”; 2nd Edition; also McGraw-Hill.

should be your idea of a control honeymoon.  Not only was (& is) Greg Shinskey an outstanding international authority on Control Theory, but he has also written with a flair for communicating down-to-earth.  Shinskey was not only “Mr. Foxboro” in his hey day, but he also is a Chemical Engineer by training who has written his books with all the ingredients so familiar to Ch Es and himself:  the details of what makes a distillation tower work, the workings of heat exchangers, reactors, mixers, fluid transport, and many other Unit Operations.  If you have read Shinskey, then you must have gotten the flavor of what a Ch E is trained to do and how he goes about it.  Shinskey used the versatility of his Ch E training to apply himself in Process Control – and did it in style.  I can think of no better “introductory” reading matter for engineers interested in knowing a little more about what Ch Es do or are supposed to know than Shinskey’s writings.

RE: Resources for a gentle introduction to chemical engineering

Unit Operations in Chemical Engineering by McCabe and Smith can be a good resource.

RE: Resources for a gentle introduction to chemical engineering

This reminds me of a chemical engineer friend at Edinburgh University who asked his tutor if there was a course in accounting for engineers. The tutor replied:
"Laddie, there's nae accounting for engineers." Please excuse the brogue, I do not wish to offend.

HAZOP at www.curryhydrocarbons.ca

RE: Resources for a gentle introduction to chemical engineering

When I was at NCSU many years ago, Richard Felder and Ronald Rousseau were there and they occasionally taught a Continuing Education accredited course with a title something like "Introduction to Chemical Engineering for non-Chemical Engineers".  I think it was given once or twice a year at a few major cities like New York, Houston, etc.  You could Google for that and see if it has survived.

Good luck,
Latexman

RE: Resources for a gentle introduction to chemical engineering

(OP)
I deeply appreciate all the responses.  

Montemayor in particular, thank you for going into such depth.  You hit the nail right on the head.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources