History of Ball Valves
History of Ball Valves
(OP)
I was recently teaching a class that included a section on valves. When I got to Ball Valves I said that "while quarter-turn plug valves have been available for most of the 20th century, the earliest ball valves were commercially available around 1967."
This little factoid (which was irrelevant to the point of my lecture) totally derailed the presentation. The factoid was based on a 1967 announcement from WKM about their "revolutionary" ball valve. One of my students said that Hydril had been making ball valves for at least 10 years by 1967. I can't find any tracks to that earlier ball valve.
Does anyone have any insite into the origin of the first ball valves?
This little factoid (which was irrelevant to the point of my lecture) totally derailed the presentation. The factoid was based on a 1967 announcement from WKM about their "revolutionary" ball valve. One of my students said that Hydril had been making ball valves for at least 10 years by 1967. I can't find any tracks to that earlier ball valve.
Does anyone have any insite into the origin of the first ball valves?
David Simpson, PE
MuleShoe Engineering
www.muleshoe-eng.com
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
The harder I work, the luckier I seem





RE: History of Ball Valves
Jeff
RE: History of Ball Valves
ht
Jamesbury ball valve, 1954:
http://w
Mike Halloran
Pembroke Pines, FL, USA
RE: History of Ball Valves
RE: History of Ball Valves
David
RE: History of Ball Valves
I'd settle for us both being wrong too.
JMW
www.ViscoAnalyser.com
RE: History of Ball Valves
JMW
www.ViscoAnalyser.com
RE: History of Ball Valves
I just came across the thread on ball valve history. I am writing a book on the history of steel valves in the US and as part of my research, I have spent many hours at the US patent office. Here is the "readers digest" version as I have researched it.
The first spherical ball-type valve was patented in 1871 by John Warren and assigned jointly to John Chapman, the founder of Chapman Valve Co. This was an all brass valve- brass ball and brass seats. Apparently it was not a commercial success, because none of my 19th century or early 20th century Chapman valve catalogs make any mention of that type of valve. We think of the metal-seated ball valve as being a recent development, but the concept has been around for 125 years!
The first resilient seated ball valve patent I have found in my research, was issued to the engineers of Crane Co., in April, 1945. In talking to long-time personnel of the company, the legend is that the marketing folks "could see no viable use for the valve" and so it was not produced by Crane! It is my understanding that within the next several years, either McCanna or Jamesbury first utilized Teflon to make the soft-seated ball valves that we know today.
I have heard rumors of resilient seated ball valves being used in the power industry prior to WWII, but I have found no catalog, patent, or advertising references to substantiate the claim.
Greg Johnson
United Valve
RE: History of Ball Valves
CODE
http://www.pmmag.com/CDA/Articles/History_of_Plumbing/c2618163a3fc7010VgnVCM100000f932a8c0____
http://pmengineer.com/CDA/ArticleInformation/features/BNP__Features__Item/0,2732,6736,00.html
_______________________________________
Feeling frisky.........
www.tailofthedragon.com