Printing White Text on Black Fill
Printing White Text on Black Fill
(OP)
I'm creating a logo for a title block right in the draft environment for our companys title block. The logo is simple to reproduce and I've already done it. But have run into a problem with printing.
I have a grey ellipse that prints black, and there is another black ellipse that is filled in with a black fill with white text overlapping it.
I have the "Print all colours as black" option on because our dimension colour is set to the default green colour. If I turn the option off, the white text is printed over top of the black ellipse, and the grey does get printed.
Is there a way for the dimensions to show as one color and be printed as another (without changing it all the time)?
I have a grey ellipse that prints black, and there is another black ellipse that is filled in with a black fill with white text overlapping it.
I have the "Print all colours as black" option on because our dimension colour is set to the default green colour. If I turn the option off, the white text is printed over top of the black ellipse, and the grey does get printed.
Is there a way for the dimensions to show as one color and be printed as another (without changing it all the time)?





RE: Printing White Text on Black Fill
Right now I have to "Bring to Front" the white text. When I group the logo and move it, the White text goes to the back, which is no good.
Anyway to draw lines at the outline of text?