NACE MR-0175
NACE MR-0175
(OP)
Hi Dear
pls.Help me and explain me pa. 4.2.2 of
NACE MR-0175(ed 2003) about Astenitic stainless.
thanx.
pls.Help me and explain me pa. 4.2.2 of
NACE MR-0175(ed 2003) about Astenitic stainless.
thanx.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: NACE MR-0175
RE: NACE MR-0175
http://i
As an aside question: are the paragraph numbers of MR0175 and ISO 15156 now aligned? As an ISO user, I can't answer the above question because there is no 4.2.2 in ISO 15156-3
Steve Jones
Materials & Corrosion Engineer
http://www.pdo.co.om/pdo/
RE: NACE MR-0175
Sorry but I can't get access to the ISO discussion forum for some reason.
Can anyone tell me what the difference, if any, there is between the NACE MR0175 and the ISO 15156 standards - I don't know if this is a silly question but my suppliers seem oblivious to the ISO standard and only quote me materials to NACE.
thjanks for any help
RE: NACE MR-0175
Steve Jones
Materials & Corrosion Engineer
http://www.pdo.co.om/pdo/
RE: NACE MR-0175