composition
composition
(OP)
HI
CAN ANYONE MENTION COMPOSITION OF UNS No 8811.
CAN ANYONE MENTION COMPOSITION OF UNS No 8811.
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: composition
Incoloy 800H
30-35 w/% Ni
19-23 Cr
39.5 min Fe
0.06-0.10 C
0.25-0.60 Al
0.25-0.60 Ti
RE: composition
Can u please give me some comparison b/w UNS No8810 and UNS No 8811.
Thanks again.
RE: composition
http:
RE: composition
U HAVE ALWAYS VERY HELPFUL TO OTHERS
TAKE CARE
RE: composition
AFTER STUDYING THIS ARTICLE BY SPECIAL METALS, I HAVE A CONFUSION.
WHAT IS THE DIFFERENCE B/W UNS NO 8810 AND UNS NO 8811 IN TERMS OF MECHANICAL AND PHYSICAL PROPERTIES?
WHICH ONE IS BETTER IN TERMS OF CREEP STRNGTH?
IS THERE ANY HARM IN WELDING AN OLD TUBE(UNS 8810) OF DIA 42mmx7.9mm thk WITH NEW TUBE(BUT OF UNS 8811) OF SAME DIMENSION?
THANKS.
RE: composition
By the nature of your questions, I would suggest that you contact Special Metals via phone or email. They have an excellent support staff that will answer all your questions about 800H and 800HT. I have dealt directly with these folks.