×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Microstation and STAAD?

Microstation and STAAD?

Microstation and STAAD?

(OP)
Just heard this from one of our jr engineers (http://biz.yahoo.com/bw/050822/225248.html?.v=1) Does anyone know what this means for STAAD + Microstation in the future? This could be very beneficial to us since we are looking for a good integrated analysis + CAD package and not ones that use File Import/Export. We tried Tekla but it was too much to handle. We use both AutoCAD and Microstation in-house.

RE: Microstation and STAAD?

I attended REIs STAAD convention in Las Vegas July 22-23.  One of the presentations was by Jim Barr of Bentley about combining Bentley Structures (Microstation) with STAAD.  They have been working to use the Open STAAD interface to seamlessly import and export structures between microstation and STAAD.  They are doing the same thing with AutoCad, LARSA, ADAPT, MathCad, TEKLA Structures and a wide variety of other programs.

RE: Microstation and STAAD?

STAAD as a popular program is not unknown to Bnetley. I fail to see why they could not "seamlessly" import and export from their major programs with quite an open architecture of STAAD in all these years. The most you can do is to export/ import DXF files and that too only the line geometry, not the complete model with all the attributes of material and section properties. No doubt, they have a lot of ground to cover before these software can talk to each other.

As a user, I don't see any immediate outcome of the takeover. Microstation was a big success for Bentley but they appear to be sitting on their past laurels.

Ciao.

RE: Microstation and STAAD?

and Netguru's stock soars from $1 to $1.04.

Smells like an anti-trust suit/crackdown on CADD vs. FEA and such programs is long overdue.

I've played with the STAAD export to .dxf. It works. That's about it.

RE: Microstation and STAAD?

(OP)
RockEngineer, thanks for the tip. I asked REI to give me a copy of their presentation at the conference you were referring to. The slides did not have that much data - I guess the live presentation had more. We do a lot of DOT work and we have to use Microstation for that. We are looking for a good integrated modeling, analysis, design and drafting package where if the results change the drawings chane as well. We have looked at REVIT + Risa (very flimsy) and Tekla (very costly and not standard) so we are eager to see the STAAD + Microstation. I think it has the best shot since they are now one company.

vooter - anti-trust? Don't you think it is the exact opposite?! There are like 1000 structural engineering/FEM packages out there. I think consolidation from Microstation is exactly what we need.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources