CGR Problems
CGR Problems
(OP)
First of all I apologize for my basic English.
Someone has had the following message of error "Improper Stock Geometry" of mechanized in CATIA V5R14SP7.
The error appears when I do a Full Video simulation. Previous stock is a CGR created in a previous Full Video simulation and Save Video Result in CGR.
I am grateful for your help.
Someone has had the following message of error "Improper Stock Geometry" of mechanized in CATIA V5R14SP7.
The error appears when I do a Full Video simulation. Previous stock is a CGR created in a previous Full Video simulation and Save Video Result in CGR.
I am grateful for your help.





RE: CGR Problems
(http://
HD43051: UNABLE TO PLAY FULL VIDEO REPLAY OF A TOOLPATH
HD22649: SMG / VIDEO REPLAY : ERROR MESSAGE: AN UNEXPECTED FUNCTION HAS OCCURED - IMPROPER STOCK GEOMETRY.
You can try starting here.
RE: CGR Problems
I have not found any solution. And I have not found any solution in WEB.
RE: CGR Problems
According to APAR HD22649 this is a program error and is suppose to be fixed in R14SP03. If the problem exists in R14SP07 I would suggest submitting a PMR for the problem.