Phantom Images in RealView Mode?
Phantom Images in RealView Mode?
(OP)
A neat challenge for RealView users
Try this:
1. Create a part and construct a plain rectangular extrude.
2. Apply a PP Copolymer material and activate RealView. Other plastics like ABS or POM also work.
You should see a "phantom" image of a warehouse. Well I see it on my laptop, a DELL M70 with a Nvidia Quadro FX Go1400. Don't call me crazy but I dont have that picture on this laptop and it's not a decall or texture.
SolidMold
Try this:
1. Create a part and construct a plain rectangular extrude.
2. Apply a PP Copolymer material and activate RealView. Other plastics like ABS or POM also work.
You should see a "phantom" image of a warehouse. Well I see it on my laptop, a DELL M70 with a Nvidia Quadro FX Go1400. Don't call me crazy but I dont have that picture on this laptop and it's not a decall or texture.
SolidMold






RE: Phantom Images in RealView Mode?
Regards,
Scott Baugh, CSWP
www.scottjbaugh.com
FAQ731-376
RE: Phantom Images in RealView Mode?
I have asked SolidWorks how can I change it and was told I can't. I'll find a way someday.
Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site (updated 06-21-05)
FAQ559-1100
FAQ559-716
RE: Phantom Images in RealView Mode?
Come on...If the idea is to get marketing/design advantage so let us change this image.
Solidmold