AN/MS/NAS hardware CAD parts
AN/MS/NAS hardware CAD parts
(OP)
Does anyone know of a toolbox module, addon for SolidWorks that you could enter a AN/MS/NAS hardware part number and a part file is generated. I know there is the Smart Fastener function, but when you use a fastener from that toolbox the BOM part number is a generic fastener description and I need AN/MS/ or NAS part number callouts.






RE: AN/MS/NAS hardware CAD parts
Best Regards,
Heckler
Sr. Mechanical Engineer
SW2005 SP 4.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)
"There is no trouble so great or grave that cannot be much diminished by a nice cup of tea" Bernard-Paul Heroux
RE: AN/MS/NAS hardware CAD parts
RE: AN/MS/NAS hardware CAD parts
What about the addon "SolidMech", I don't know what the latest version is....but this addons looks like somehting 4 you...
Hope this helps
colombo75
Industrial Designer
SW2005 SP4.0
RE: AN/MS/NAS hardware CAD parts
Regards,
Scott Baugh, CSWP
3DVision Technologies
www.3dvisiontech.com
www.scottjbaugh.com
FAQ731-376