×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

How do you design concrete wall?

How do you design concrete wall?

How do you design concrete wall?

(OP)
This may be a dumb question, but I'm wondering how you would design a concrete cantilever retaining wall (i.e. size the steel and the width).  The wall is 12' high and about 25' long.  Do I just take 1 foot sections and model them like beam-columns?  Thanks in advance.

RE: How do you design concrete wall?

Yes, the easiest way to do it is model the wall as 1 foot wide beam-columns.  The vertical force (from beam above or floor it is supporting) will probably have much less effect on the size of the wall than the horizontal soil or water pressure force.  If the top of the wall isn't supporting anything, I wouldn't even take into account the weight of the wall as a vertical force, and just make sure the design for water / soil pressure isn't the bare minimum.  Using beam tables from a steel manual or textbook (or homemade tables, yeah right), you can come up with the moment, shear, and deflection in the wall.  I should add as a clarification, the 1 foot widths are vertical not horizontal.  (if the wall was taller than it was wide, maybe you would use imaginary horizontal widths)

RE: How do you design concrete wall?

The CRSI Handbook describes the design of retaining walls. It also has "ready-made" tables, but they are somewhat limited in terms of application.
It sounds like you don't have software available. You might try downloading a free demo version of design softare, to compare results. Enercalc.com has a design package which includes retaining wall design. Its demo is nearly full-featured, and free.

RE: How do you design concrete wall?

Most 'DOT'S' have standard plates for retaining walls. Go to your local DOT site and poke around.

RE: How do you design concrete wall?

(OP)
dicksewerrat...I'm not familiar with DOT sites...could you lead me in the right direction?

RE: How do you design concrete wall?

I went through the CalTrans site and was unable to find retaining wall design example; however, I found a few pdfs related to retaining wall design from the City of Los Angeles site.  Hopefully this is a good starting point.

http://www.lacity.org/LADBS/faq/info_bulletins.htm

http://www.lacity.org/LADBS/faq/info%20bulletins/building%20code/IB-P-BC%202002-083%20Retaining%20Walls-10-15-01.pdf

http://www.lacity.org/LADBS/faq/info%20bulletins/building%20code/IB-P-BC%202002-002%20Retaining%20Wall%20Rev%2010-01.pdf

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources