SA-307 bolts
SA-307 bolts
(OP)
Is it true that SA-307 bolts can not withstand galvanization?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: SA-307 bolts
RE: SA-307 bolts
Clause 4.5.1 of SA-307 of ASME Section II Part A states as follows: -
When zinc-coated fasteners are required, the purchaser shall specify the zinc-coating process, for example hot dip, mechanically deposited, or no preference.