×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Relais

Relais

(OP)
I want to know more about the thing called a 'relais', i heard t is a sort of electronic switch, but i want to know more about it.

Everything is usefull

RE: Relais

  Electromechanical relays are (were?) apparatus consisting of an electromagnet, as imput element, which, when energized, mecanically operates electric contact/s acting as output device/s. Depending on type, relay may have several contacts of different kind: normally open (NO) or normally closed (NC), swith break bebor make type (BBM) or make before break (MBB). Insulates input and outputs.
 Kind regards

Julian

RE: Relais

Hi,

I think "relais" is a derivation of the English "relays".
It is possibly French in origin and/or a spelling mistake in English text.

When I did a search on the word there were quite a few hits, all of which refered to relay action.

If you know about relays and just didn't know about the word you mentioned then just ignore the next bit.

If you are not sure what a relay is then :-

Electro Mechanical
An  Electro Mechanical relay is a device that uses the fact that when a current flows through a coil it generates a magnetic field.
A relay has a coil usually with an iron core. As the input current flows through the coil it generates a magnetic field concentrated in that core.The magnetic field is used to pull an armature. The armature then switches the contacts. Like a switch the contacts can be Normally Open (NO) or Normally Closed (NC). When switched they change to thier opposite state. When the current stops flowing through the coil the magnetic field is lost and a spring pulls the armature/contacts back to their original position.
They are used for a numbe of reasons.
1. A small voltage can control high voltages (eg a 5v coil could switch 100's of volts providing the contacts were so rated)
2. a single voltage can switch on/off many other voltages
3. As a distant controlled switch

Solid State
A solid state relay is a device that uses semiconductors to perform the action of a relay (see above) The advantage of these is they have no moving parts and are note prone to wear or contact resistance. The disadvantage is the lack of electrical isolation (although some do have optically isolated inputs)

The above explanation is VERY brief, there are as many types of relays as words on this post which I have not even mentioned eg Reed relay, Time Delay relay, Thermal relay, Co-ax relay etc.

Any help ?, yes no let me know.

Regards

RE: Relais

(OP)
Thanks for the replies. I made a schedule of a simple circuit, but i don't know if it's correct. Does someone know a way to show it to you?

RE: Relais

Hi,

Not sure what you mean.

Do you want someone to check your schematic ?.
If so then I'd be happy to review it.
if you can scan it and send it to tps72v4@hotmail.com
and try and keep it less than 1 MB.

Any help ?, yes no let me know.

Regards

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources