CuNiFe
CuNiFe
(OP)
Hello,
I'm new to the site but have have reviewed threads within and see it is very helpful and well established source of information and advice.
I'm looking for a distributor of CuNiFe for existing projects. Also, since I'm not currently able to locate source, would also like to know possible replacement material.
I've heard that Arnokrome, Arnold Eng. is a good replacement. Are there other suppliers of CuNiFe and or other suitable replacement materials.
Thanks in advance
RHmagster
I'm new to the site but have have reviewed threads within and see it is very helpful and well established source of information and advice.
I'm looking for a distributor of CuNiFe for existing projects. Also, since I'm not currently able to locate source, would also like to know possible replacement material.
I've heard that Arnokrome, Arnold Eng. is a good replacement. Are there other suppliers of CuNiFe and or other suitable replacement materials.
Thanks in advance
RHmagster





RE: CuNiFe
Look at the Arnold material, there aren't really many options.
Do you know anyone with a small rolling mill? You could get a specialty caster if Ni alloys to cast some small ingots for you and then you could get them rolled.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
http://www.trenttube.com/Trent/tech_form.htm
RE: CuNiFe
Thanks
RHmagster
RE: CuNiFe
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
http://www.trenttube.com/Trent/tech_form.htm