×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Centerline
2

Centerline

Centerline

(OP)
Does anyone know how to get the centerline of a 3d fillet?
I have a HD2 with HA1 and GSO.

Thanks in advance
forfun

RE: Centerline

I had to find the centerline for a 3D tube (dumb solid) and I used the Spine option.  In some lengths of the tube I had to set the Start Point to get the correct result.
Maybe someone has a better suggestion.

RE: Centerline

2

In the picture the background model has the (Red) fillet whose centreline is required.

The foreground model is the construction one to do it.

                                      

  •     Analise the original Fillet Radius.
  •     Undo the model to the point where the fillet was to be made.
  •     Offset the two original surfaces that were filleted, by the Fillet Radius.
  •     The (White)intersection curve of the two (Transparent) offsets is the Fillet Centreline.
  •     If the fillet had a Law driven variable radius, then use the same Law to create the surface offsets.





RE: Centerline

Without destroying any geometry, you can also construct perpendicular surfaces at each of the fillet boundaries, and intersect them, as shown.




**************
Check out CATBlog!

RE: Centerline


V5, like other systems, allows various ways of doing things and naturally some will be better, or more accurate, than others.

In my first picture the Backtrack method was deliberately used to reduce the risk of error creeping in.
The Red Fillet was derived from the two surfaces, so to find the centreline using them is the most accurate way. To work from a derived element is analogous to photocopying a photocopy, there is bound to be some degradation.

In this picture two fences have been created on the trimmed boundaries of the original surfaces and normal to them. It is best to hide the fillet and it's boundaries first. Going back to the source elements is the better way.
Of course, the fillet may be a Blend or something else with a spine, so that the fillet is rather more complex and requires a different approach.

I seem to remember, years ago, previous versions of Catia had a function in Curve 1 or Curve 2, called Bi-Tangent and Tri-Tangent. These would compute the curves created by rolling an imaginary ball along the valley of two surfaces, the output was the contact curves and the locus of the centre of the rolling ball.  

But, whatever way it is done, an understanding of the geometry and what is really happening is invaluable. It's too easy to create something that looks right but may be technically, rubbish.

                                           



 

RE: Centerline

Quote:


But, whatever way it is done, an understanding of the geometry and what is really happening is invaluable. It's too easy to create something that looks right but may be technically, rubbish.

The general assumption is, and should always be, "garbage in, garbage out."

I failed to clarify that, but I don't think that the analogy of, "To work from a derived element is analogous to photocopying a photocopy, there is bound to be some degradation" is entirely true.  It CAN be true, but certainly is not always, or even most of the time.

To find out if the fillet is workable without destroying the geometry, one would only need to do a preliminary surfaic analysis.  It is also assumed that anyone working in surfacing, asking specific questions, must be familiar with the basic tools.

Your mileage may vary, but I've found that quite frequently one way OR the other is THE ONLY way.  Sometimes, even what seems like a simple fillet, won't produce a quality result using the method you described first, which is why I added the extra thought.  Not to outdo you by any means - your example was excellent - just to add "plan B," if you will.

 




**************
Check out CATBlog!

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources