SAE Flanges -
SAE Flanges -
(OP)
I am looking for the standard which gives dimensions on SAE flanges. Also why are they square?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: SAE Flanges -
See ANSI B16.1-1975 for Cast Iron flanges and ANSIB16.5-1981 for Steel Flanges.
Both of these style flanges are round. Could you carify your questions about the squareness.
RLJ
RE: SAE Flanges -
I have three catalogs on SAE hydraulic flanges that give dimensional data. The code they reference is SAE J518 code 61 & 62.
The companies are as follows:
Main Manufacturing Products (800-521-7918)these are square flanges.
Havit Hydraulic flanges distributed by Clinton Industries, Inc. (713-977-5521) these are slightly hexagonal in shape.
Anchor Flange Company (513-527-4444) these are slightly hexagonal, square/rectangular with sharp corners and square/rectangular with rounded corners.
I requested the info in 1993, so I am not sure how current the phone information is.
I hope this helps.