Ferroresonance transformer design, help!.
Ferroresonance transformer design, help!.
(OP)
Hi to All,
I have been asked to design a constant voltage transformer, also known as ferroresonance transformers, 30W output power, 230VAC input, 6KV AC output.
I am not too woried about the 6KV bit as i specialise in HV power supplies, but i need some help in the primary side, i have been told that i need an extra winding in series with the primary and connect it to a fairly large capacitor.
Does anybody know how to design these type of transformers, any calculations out there?.
Thanks in advance.
ALex.
alex@adept-power.co.uk
I have been asked to design a constant voltage transformer, also known as ferroresonance transformers, 30W output power, 230VAC input, 6KV AC output.
I am not too woried about the 6KV bit as i specialise in HV power supplies, but i need some help in the primary side, i have been told that i need an extra winding in series with the primary and connect it to a fairly large capacitor.
Does anybody know how to design these type of transformers, any calculations out there?.
Thanks in advance.
ALex.
alex@adept-power.co.uk





RE: Ferroresonance transformer design, help!.
RE: Ferroresonance transformer design, help!.
A bit supid from me, i do apologise.
kind regard.
Alex.
RE: Ferroresonance transformer design, help!.
indicated 11 entries, and got back here, (4 times).
Wanted to see the 11 listed posts? This an intrest at high
frequency (50k t0 500k).
If I need to be someplace else, (to respond) where this is already started please let me know.
In general I did not think this was legal in (off line)"primary" power supplies, in the U K anymore.
I will try to review tomorrow.