CATIA V4 Kinematics Sheet
CATIA V4 Kinematics Sheet
(OP)
When learning Kinematics in Version 4 I was given a joints crib sheet which like all other useful support documents has been borrowed and never returned.
It was two pages which detailed all of the joints which could be achieved in V4 kinematics, I have a customer who is tring to break his teeth on kinematics V4 and was wondering if anyone out there had one? If so could you possibly supply me a copy.
Thanks
It was two pages which detailed all of the joints which could be achieved in V4 kinematics, I have a customer who is tring to break his teeth on kinematics V4 and was wondering if anyone out there had one? If so could you possibly supply me a copy.
Thanks





RE: CATIA V4 Kinematics Sheet
If you look at the Kinematics User Guide (from IBM) there is a page that describes all the joint types with simple pictures of each.
Your system admin should have either the printed book, or a CD containing the online version of it.
RE: CATIA V4 Kinematics Sheet
Have tried all the people I thought would have one. It was two additional sheets which were given me when I did my orginal CATIA V4 training with BAe, through I believe INCAT, but am not 100% sure, about 10 yrs ago. The sheet had examples of all the kinematic joints in picture format, and was useful when I first learnt kinematics, but was never used afterwards.
I have a friend who is learning kinematics of his own back on V4 now and was hoping to find a copy from one of the forum guys.