Surface Preparation of Nickel Cobalt
Surface Preparation of Nickel Cobalt
(OP)
I have been conducting some research on the surface preparation of Nickel Cobalt alloys for adhesive bonding. I am looking to try other surface preparation techniques aside from concentrated Nitric Acid. If anyone has any recommendations, please let me know.
Thanks,
vtmys
Thanks,
vtmys





RE: Surface Preparation of Nickel Cobalt
What is the alloy?
This might help with an etchant.
What type adhesive are you using?
RE: Surface Preparation of Nickel Cobalt
I've never done this with NiCo alloy but you might try Sodium or Ammonium Bifluoride solution at about 140F.